Thread: Engine Knock
View Single Post
  #2 (permalink)  
Old 07-11-2017, 12:18 PM
IronAffliction IronAffliction is offline
Almost Senior Member
Join Date: Apr 2015
Location: yelm WA
Posts: 521
Member #15071
I think a tear down is in your best interest. If your temps got over 260 you could have warped the heads plus low on oil could have caused more problems. For peace of mind i would tear the top end apart and see if you can find any issues and find where you are getting this knocking from. Mine did it awhile ago found out my keepers on one of my valve spring came halfway out and the rocker was hitting it. As far as upgrading i would find this issue first and go from there because those upgrades can get very expensive especially if you do your valves or need a valve job done
Reply With Quote