Thread: QC Stalling
View Single Post
  #18 (permalink)  
Old 07-15-2017, 03:17 AM
VNDK8TR VNDK8TR is offline
You got a Hemi?
 
Join Date: Apr 2017
Posts: 5
Member #16568
I did it 5 6 months ago. I even ordered another of each to keep in stock. Since I replaced sensors I have not had one issue. It worked. There not expensive. Worth it to just do it. Easy to do. Will take 20 min. Crank sensor is on passengers side just inside by motor mount. You will need to lift front right of truck. Accessible only from bottom. Speed sensor is on throttle body. 2 screws and connector , done. Make sure to disconnect both positive and negative terminals before you start. When your done before connecting terminals touch them together for 30 sec. don't worry it will only release any remaining power. This will make sure that your error codes will be deleted with out a doubt. Hope this helps.

Last edited by VNDK8TR; 07-15-2017 at 03:34 AM.
Reply With Quote