View Single Post
  #9 (permalink)  
Old 09-14-2017, 03:15 AM
Pirana131313's Avatar
Pirana131313 Pirana131313 is offline
Almost Senior Member
Midwest VTCoA Regional Member
Join Date: May 2012
Posts: 541
Member #13290
Ensure that there was good connection from boot to plug as well as no (burned) spots on the plug wire to that cylinder. You can try swapping injectors, send them out, buy new ones, or pull the entire rail off and measure the amount of fuel by using cups. If none of these work, i would take a look at coil packs and make sure you have good spark. Also make sure that both O-rings are seated if you remove the injector and rail again.

Full bolt on, 2/3 drop, 4:56's +lots of extras.

Boost Coming Soon.

Reply With Quote