View Single Post
  #5 (permalink)  
Old 05-17-2018, 12:40 AM
2quik6 2quik6 is offline
Junior Member
Join Date: Jul 2017
Posts: 22
Member #17053
I have driven it well over 100 miles, have done each of the test cycles actions at least twice, but not in the exact order....there is absolutely no place in a 50 mile radius of me that you could do the cycle in the exact sequence.
I assume the 2-bar MAP I have for the SC and associated programming is throwing it tonight I have refreshed it with the stock program and put the stock MAP back in with the only change being the 69lb injector constant....will go from here and do the different drive cycles again over the next 2 days....

Last edited by 2quik6; 05-17-2018 at 01:04 AM.
Reply With Quote