View Single Post
  #7 (permalink)  
Old 01-10-2019, 10:10 AM
Slitherbeast's Avatar
Slitherbeast Slitherbeast is offline
VIPER POWERED
Canadian VTCoA Regional Member
 
Join Date: Sep 2007
Location: Alberta
Posts: 2,226
Member #2340
Welcome to the red Button Club! Don't change the rear gears! you will enjoy 3rd more and 6th gear has a design flaw.... so try not to use it, unless you are cruising at 85 mph. Try not to worry about mpg, let the engine spin! but keep it no higher than 5500 rpm and you will enjoy that truck a VERY long time!
__________________
"Haters don't really hate you, they hate themselves cause you're a reflection of what they wish to be".


#993 04 blk RC 4.56 gears,Harland Sharp Rockers,3/8" Hardened Pushrods, PSI Valve Springs,,Striker Valve Cover Spacers, JMB catless mids,Magnaflow Catback, Torries' Tune,B&M Shifter,Stinker's Extreme Lowering Kit, Caltracs,Catchcan, Forged Wiseco Pistons,Molnar Rods, Clevite Bearings.Center Force Clutch,Cometics Head Gaskets,ARP Head Studs , Pioneer X950BH Double Din , Grants Steering Wheel , Bronze shifter bushing, Bronze pads, Billet Keys in the T56 . And the list continues......
Reply With Quote