Go Back   Dodge Ram SRT-10 Forum - Viper Truck Club of America > Viper Truck SRT-10 Discussion > Ram Srt-10 Racing
Home Forum Register FAQ Members List Social Groups Calendar Garage Mark Forums Read

Ram Srt-10 Racing

Turbo 2006 QC vs 2017 Hell Kitty


This is a discussion on Turbo 2006 QC vs 2017 Hell Kitty within the Ram Srt-10 Racing forums, part of the Viper Truck SRT-10 Discussion category!
Nice kill! I'd look at 3.73 honestly with your auto. What were your mph? You should be around 13-1500 hp ...



Like Tree7Likes

Reply
 
LinkBack Thread Tools Display Modes
  #11 (permalink)  
Old 10-19-2017, 10:11 AM
VENOMOUS1 RACING's Avatar
VIPER POWERED
Southwest VTCoA Regional Member
Southwest VTCoA Regional Rep
2013 Viper Truck of The Month
 
Join Date: May 2009
Location: Wacko Waco,TX
Age: 43
Posts: 12,701
Member #10675
Nice kill! I'd look at 3.73 honestly with your auto. What were your mph? You should be around 13-1500 hp with that much boost. No reason you shouldn't be deep in the 10s once ironed out. Hell I ran 12.1 NA so I'd expect you to be much more faster than mid 11s. Stall
Converter and 3.73 I think will complete the package. Maybe even a gear splitter for the 48re
Congrats

__________________
** 1 OF 25 2005 SRT-10 Quad Cab Tremec T56
Equipped with our conversion kit.
All your Viper or Viper Truck needs in one stop. From Go Fast, To Go Low, To getting her Sexy AF!
BUILDING STREET KINGS/NOT DYNO QUEENS
https://m.facebook.com/Venomous1Racing/?ref=bookmarks
254-722-5697
Reply With Quote
  #12 (permalink)  
Old 10-19-2017, 10:32 AM
VENOMOUS1 RACING's Avatar
VIPER POWERED
Southwest VTCoA Regional Member
Southwest VTCoA Regional Rep
2013 Viper Truck of The Month
 
Join Date: May 2009
Location: Wacko Waco,TX
Age: 43
Posts: 12,701
Member #10675
Think that gets you a spot in Top 10 Fastest list and
__________________
** 1 OF 25 2005 SRT-10 Quad Cab Tremec T56
Equipped with our conversion kit.
All your Viper or Viper Truck needs in one stop. From Go Fast, To Go Low, To getting her Sexy AF!
BUILDING STREET KINGS/NOT DYNO QUEENS
https://m.facebook.com/Venomous1Racing/?ref=bookmarks
254-722-5697
Reply With Quote
  #13 (permalink)  
Old 10-19-2017, 11:04 AM
SrtDub's Avatar
Member
 
Join Date: Nov 2012
Location: Texas
Posts: 100
Member #13711
Quote:
Originally Posted by VPRPWRD View Post
Where did the procharger kit end up?
it went to a guy in Germany
__________________
Fully Built Motor (by me)
Fully Built 48re (by me)
88mm Garret Single Turbo Kit built (by me)
Big thanks to JMB and JTSVP
6200 Lbs 11.70@121 on Factory 22s
Reply With Quote
  #14 (permalink)  
Old 10-19-2017, 11:09 AM
SrtDub's Avatar
Member
 
Join Date: Nov 2012
Location: Texas
Posts: 100
Member #13711
Quote:
Originally Posted by VENOMOUS1 RACING View Post
Nice kill! I'd look at 3.73 honestly with your auto. What were your mph? You should be around 13-1500 hp with that much boost. No reason you shouldn't be deep in the 10s once ironed out. Hell I ran 12.1 NA so I'd expect you to be much more faster than mid 11s. Stall
Converter and 3.73 I think will complete the package. Maybe even a gear splitter for the 48re
Congrats
i think i have the heaviest srt-10 ever produced is part of my problem lol... right now we are leaving on 0 boost with the terrible 1.9 60fts.. Goerend transmission is making me a looser converter as we speak to swap in the truck next... we'll c what that does for building power off the line... the truck is tuned real conservatively on 93 octane no meth ,not sure what actual power it makes (thats a whole other story ) but im going 4.10 gear first because its gonna need it to get rolling out the hole. best mph so far is 121.3 ..5 passes on truck so far
__________________
Fully Built Motor (by me)
Fully Built 48re (by me)
88mm Garret Single Turbo Kit built (by me)
Big thanks to JMB and JTSVP
6200 Lbs 11.70@121 on Factory 22s
Reply With Quote
  #15 (permalink)  
Old 10-19-2017, 11:19 AM
VENOMOUS1 RACING's Avatar
VIPER POWERED
Southwest VTCoA Regional Member
Southwest VTCoA Regional Rep
2013 Viper Truck of The Month
 
Join Date: May 2009
Location: Wacko Waco,TX
Age: 43
Posts: 12,701
Member #10675
Quote:
Originally Posted by SrtDub View Post
i think i have the heaviest srt-10 ever produced is part of my problem lol... right now we are leaving on 0 boost with the terrible 1.9 60fts.. Goerend transmission is making me a looser converter as we speak to swap in the truck next... we'll c what that does for building power off the line... the truck is tuned real conservatively on 93 octane no meth ,not sure what actual power it makes (thats a whole other story ) but im going 4.10 gear first because its gonna need it to get rolling out the hole. best mph so far is 121.3 ..5 passes on truck so far
Yeah just bumped the 10 fastest thread. Few years ago that 11.7 would have put you in 10th spot. Now 11.2 is 10th. Just sayin lol. Maybe new goal of 11.1 instead of 11.5?
I've built 4.10 48re QC in the past and much better than 4.56 for sure. Also used the RC spring packs. Huge difference! I promise you 3.73 will get you where you need to be on a 32" stock tire. Hopefully they do around a 3000 stall and triple disc billet converter. Ours are hard to beat honestly but you already have that in motion. Lol
Congrats on building your beast on your own and putting it to the test! That's what these trucks were built for. I
__________________
** 1 OF 25 2005 SRT-10 Quad Cab Tremec T56
Equipped with our conversion kit.
All your Viper or Viper Truck needs in one stop. From Go Fast, To Go Low, To getting her Sexy AF!
BUILDING STREET KINGS/NOT DYNO QUEENS
https://m.facebook.com/Venomous1Racing/?ref=bookmarks
254-722-5697
Reply With Quote
  #16 (permalink)  
Old 10-19-2017, 11:21 AM
VENOMOUS1 RACING's Avatar
VIPER POWERED
Southwest VTCoA Regional Member
Southwest VTCoA Regional Rep
2013 Viper Truck of The Month
 
Join Date: May 2009
Location: Wacko Waco,TX
Age: 43
Posts: 12,701
Member #10675
Yes the weight sounds off imo. Do you have a huge stereo system? 10 dead bodies still in bed you forgot about? lmao
__________________
** 1 OF 25 2005 SRT-10 Quad Cab Tremec T56
Equipped with our conversion kit.
All your Viper or Viper Truck needs in one stop. From Go Fast, To Go Low, To getting her Sexy AF!
BUILDING STREET KINGS/NOT DYNO QUEENS
https://m.facebook.com/Venomous1Racing/?ref=bookmarks
254-722-5697
Reply With Quote
  #17 (permalink)  
Old 10-19-2017, 11:50 AM
SrtDub's Avatar
Member
 
Join Date: Nov 2012
Location: Texas
Posts: 100
Member #13711
Quote:
Originally Posted by VENOMOUS1 RACING View Post
Yes the weight sounds off imo. Do you have a huge stereo system? 10 dead bodies still in bed you forgot about? lmao
hahaha i havent weighed it since i done the the turbo kit but last time at royal purple with the F1 it was over 6100 lbs if i remember with me in it... we will start having traction problems soon with the looser converter (circle d didnt wanna build me a converter for the 48re)... i already plan on doing a small brake kit and some bogart wheels... the goal is to run 10s but i know that will have to be on a drag wheel set up.. 11.50s on 22s should be obtainable as well
__________________
Fully Built Motor (by me)
Fully Built 48re (by me)
88mm Garret Single Turbo Kit built (by me)
Big thanks to JMB and JTSVP
6200 Lbs 11.70@121 on Factory 22s
Reply With Quote
  #18 (permalink)  
Old 10-19-2017, 11:59 AM
VENOMOUS1 RACING's Avatar
VIPER POWERED
Southwest VTCoA Regional Member
Southwest VTCoA Regional Rep
2013 Viper Truck of The Month
 
Join Date: May 2009
Location: Wacko Waco,TX
Age: 43
Posts: 12,701
Member #10675
Quote:
Originally Posted by SrtDub View Post
hahaha i havent weighed it since i done the the turbo kit but last time at royal purple with the F1 it was over 6100 lbs if i remember with me in it... we will start having traction problems soon with the looser converter (circle d didnt wanna build me a converter for the 48re)... i already plan on doing a small brake kit and some bogart wheels... the goal is to run 10s but i know that will have to be on a drag wheel set up.. 11.50s on 22s should be obtainable as well
Circle D and I have a "thing" on the Viper Truck 48re converters
Many years we've R&D a solution for these beasts. We have had a triple disc biller converter for the 48re going on 5 years now.
Yessir it will be a beast for sure! Look forward to seeing it soon man.
__________________
** 1 OF 25 2005 SRT-10 Quad Cab Tremec T56
Equipped with our conversion kit.
All your Viper or Viper Truck needs in one stop. From Go Fast, To Go Low, To getting her Sexy AF!
BUILDING STREET KINGS/NOT DYNO QUEENS
https://m.facebook.com/Venomous1Racing/?ref=bookmarks
254-722-5697
Reply With Quote
  #19 (permalink)  
Old 10-19-2017, 12:29 PM
SrtDub's Avatar
Member
 
Join Date: Nov 2012
Location: Texas
Posts: 100
Member #13711
they worked on my previous converter but when i called them up about building this one he said that they have gottten away from them an recommended i talk to suncoast or ats lol.. i went with goerend tho hoping to go 2 steps looser which should get it to spool up to 2500 or so on the foot brake
VENOMOUS1 RACING likes this.
__________________
Fully Built Motor (by me)
Fully Built 48re (by me)
88mm Garret Single Turbo Kit built (by me)
Big thanks to JMB and JTSVP
6200 Lbs 11.70@121 on Factory 22s
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
worlds greatest 1/4 mile times LOLOL enjoy! JTS VENOM PERFORMANCE General Discussion 31 05-26-2010 01:33 AM
1500Hp Twin Turbo Heffner Engine SRT10VENOMOUS General Discussion 17 06-12-2009 02:08 PM
Hell is Frozen K-80-123 Non-Offensive 7 09-19-2007 10:55 PM





All times are GMT -4. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
vB.Sponsors
This site is supported by its members, vendors, and administration. Vtcoa.com is in no way affiliated with Daimler Chrysler. Dodge, Viper,Ram SRT-10, the Viper logo and likeness are registered trademarks of Daimler Chrysler. The contents of this site are owned by Vtcoa.com and may not be used or reproduced without the express written permission of the Administrator.
GM Truck Forum
Ford Raptor Forums
Chevy Tahoe Forum
Chevy Cobalt Forum
Chevy Camaro Forum
Toyota FJ Cruiser Forum
Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Ford Expedition Forum
Chevy Equinox Forum
Chevy Cruze Forum
Jeep Liberty Forum
Jeep Forum
Dodge Ram Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum
Dodge Challenger Forum
Sotball Forums
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Cadillac Forum
Cadillac XTS Forum