Go Back   Dodge Ram SRT-10 Forum - Viper Truck Club of America > Dodge Ram SRT10 - Classifieds > SRT-10 Trucks and Parts For Sale
Home Forum Register FAQ Members List Social Groups Calendar Garage Mark Forums Read

SRT-10 Trucks and Parts For Sale

Built SRT10 Ram / Viper engine for sale. STEAL @ $3995


This is a discussion on Built SRT10 Ram / Viper engine for sale. STEAL @ $3995 within the SRT-10 Trucks and Parts For Sale forums, part of the Dodge Ram SRT10 - Classifieds category!
Hey guys. I listed this engine for sale a while back but no one actually came up with the money. ...



Like Tree1Likes

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-13-2011, 01:59 PM
robwclark's Avatar
Almost Senior Member
 
Join Date: Jun 2009
Location: Cleburne, TX
Age: 41
Posts: 557
Member #10773
Send a message via AIM to robwclark
Built SRT10 Ram / Viper engine for sale. STEAL @ $3995

Hey guys. I listed this engine for sale a while back but no one actually came up with the money. At the time I said I wanted $5000 Firm, but times just keep getting tougher so I am lowering it to $3995 which is an absolute STEAL! Originally I pulled this engine out of my 2006 RC for a rebuild due to low compression on one cylinder because I had a paxton on it. Well, after about 3 mind changes, I ended up putting a bone stock engine back in it, and returned it to 100% stock, and sold it to a dealer. Now, over a year later the motor for the truck that have spent countless hours building and researching is finally ready. Only problem is, I dont have a Viper car or Truck to put it in. It is a complete longblock, but I purposely didnt install the heads or intake manifold simply because I want the person who buys this engine to see the work first hand. The engine was completely torn down and machined the cylinders just a tad over, and I reassembled it with Diamond Racing Forged Pistons and Rings, Clevite Bearings, factory camshaft, factory rods, and the original forged factory crank was turned .10. It was cleaned and baked and looks like a freaking crate motor. The engine was assembled by myself and my builder/machinist. I dont have any big names to throw out there, but I'll tell you this: All the work was done with an incredible amount of pride. This was supposed to be MY engine going into MY truck, so every clearance, spec, and torque were PERFECTLY executed. This will serve someone an excellent engine for miles and years to come if it is maintained properly. This engine will handle 12 or 15 lbs of boost no problem, probably more. I can provide the VIN# from the original truck this engine was removed from. This engine will work in all 2004-2006 Ram SRT-10 Viper Trucks, and all 2003-2007 Viper cars. The heads are stock, and just checked out completely at my machine shop and are 100% ready. I had intended on using stock heads with the paxton because as many members will testify, paxton-trucks seem to offer a better bang-for-the-buck with stock heads. The intake manifold is stock except it has been powder coated black to match my old truck. The factory push rods and rockers are included. Knock sensors, and various other sensors are included(see pics). The factory clutch slave cylinder and hydrolics are included. The valve covers are included. The factory exhaust manifolds are included. Water Pump is included. I have also included the cam and crank sensor pig-tails in case you put it in an 04-05 model, you will need these. No throttle body, PCM, wire harness, or oil pan as all this stuff was used on the truck the engine came from. Its ready for your choice of Cam, exhaust, Throttle body, rockers etc. Compression is still factory spec. It will make a wonderful NOS engine or Paxton/Turbo engine. I built it to use a Paxton on it. Anyway, I need it to go away. I need $3995 for this complete long block engine. This engine is worth SO MUCH MORE! This is a huge savings for whoever buys it. This engine is new and never been run. I will consider trades of any kind of value, but keep in mind, I'm selling so cheap, I would expect the buyer to be fair. I dont check my PM box very often so its best to call me at (817)556-1133. I am close to Fort Worth, Texas. I will be happy to help arrange shipping, if needed. I have a bunch of pics but i cant post them on here from my iPhone, unless someone can tell me how. If anyone wants pics just get me a number and I'll text them over, but only if you are serious about buying this engine, so PLEASE dont ask for pics unless your serious. Thanks for reading guys and sorry I had to jump the Viper Truck ship. Financial obligations forced it. Call me anytime. Robert

__________________
Robert Clark. Cleburne, TX. 2004 Ram SRT10. 2006 Body Conversion. Night Runner Wheels/headlamps. Original block now 530ci. Forged CP Pistons, Stroked Crank, Billet Mains, Crower Cam, Extensive Headwork. Twin Garrett Turbos, Water/Air Intercooler w/ Heat Exchanger. Complete Aeromotive Fuel System, Line Locks, X-Metal TB, Custom Longtube headers, Flowmaster Mufflers, Cal-Tracks. Dynojet. 93 deg on 7 lbs of boost it made 822 RWHP /856 RWT.
  #2 (permalink)  
Old 12-13-2011, 02:04 PM
rare03srt10's Avatar
VIPER POWERED
West VTCoA Regional Member
 
Join Date: Feb 2011
Location: Fountain Valley, CA
Age: 31
Posts: 2,941
Member #12019
BUUMP, GLWS
__________________
-Justin
Grey 2006 Ford F-250 POWERSTROKE DIESEL
White 2002 Bayliner Ciera Express 22 foot cruiser
White 1998 Jeep Grand Cherokee Limited
2006 Suzuki GSX-R750 - SOLD
Red 2005 Ford F-250 POWERSTROKE - SOLD
Black 2002 Ford F-150 Harley Davidson - SOLD
Black Project SRT-10 quab cab - SOLD

965 N. Batavia, Orange, CA. 92867
  #3 (permalink)  
Old 12-13-2011, 04:32 PM
SRT10VENOMOUS's Avatar
1800HP Club. And climbing
Canadian VTCoA Regional Member
 
Join Date: May 2006
Location: Vancover BC Canada
Age: 37
Posts: 5,819
Member #7
Send a message via MSN to SRT10VENOMOUS Send a message via Yahoo to SRT10VENOMOUS
insane price for that... if i had some spare cash right now id be all over that...
__________________
SRT LINE UP
04 SRT-10 Ram #849

04 SRT10 Ram - under construction

  #4 (permalink)  
Old 12-13-2011, 05:19 PM
505'sFastestViper.'s Avatar
VIPER POWERED
Southwest VTCoA Regional Rep
 
Join Date: Apr 2007
Location: Farmington, N.M.
Age: 36
Posts: 13,812
Member #1557
i could not read that paragraph sorry i started getting a fn headache!!!
__________________
Best 1/4 Mile In The 7'sssssss
  #5 (permalink)  
Old 12-13-2011, 05:22 PM
505'sFastestViper.'s Avatar
VIPER POWERED
Southwest VTCoA Regional Rep
 
Join Date: Apr 2007
Location: Farmington, N.M.
Age: 36
Posts: 13,812
Member #1557
Quote:
Originally Posted by robwclark View Post
Hey guys. I listed this engine for sale a while back but no one actually came up with the money. At the time I said I wanted $5000 Firm, but times just keep getting tougher so I am lowering it to $3995 which is an absolute STEAL!

Originally I pulled this engine out of my 2006 RC for a rebuild due to low compression on one cylinder because I had a paxton on it. Well, after about 3 mind changes, I ended up putting a bone stock engine back in it, and returned it to 100% stock, and sold it to a dealer.

Now, over a year later the motor for the truck that have spent countless hours building and researching is finally ready. Only problem is, I dont have a Viper car or Truck to put it in.

It is a complete longblock, but I purposely didnt install the heads or intake manifold simply because I want the person who buys this engine to see the work first hand. The engine was completely torn down and machined the cylinders just a tad over, and I reassembled it with Diamond Racing Forged Pistons and Rings, Clevite Bearings, factory camshaft, factory rods, and the original forged factory crank was turned .10. It was cleaned and baked and looks like a freaking crate motor.

The engine was assembled by myself and my builder/machinist. I dont have any big names to throw out there, but I'll tell you this: All the work was done with an incredible amount of pride. This was supposed to be MY engine going into MY truck, so every clearance, spec, and torque were PERFECTLY executed. This will serve someone an excellent engine for miles and years to come if it is maintained properly.

This engine will handle 12 or 15 lbs of boost no problem, probably more. I can provide the VIN# from the original truck this engine was removed from. This engine will work in all 2004-2006 Ram SRT-10 Viper Trucks, and all 2003-2007 Viper cars. The heads are stock, and just checked out completely at my machine shop and are 100% ready. I had intended on using stock heads with the paxton because as many members will testify, paxton-trucks seem to offer a better bang-for-the-buck with stock heads.

The intake manifold is stock except it has been powder coated black to match my old truck. The factory push rods and rockers are included. Knock sensors, and various other sensors are included(see pics). The factory clutch slave cylinder and hydrolics are included. The valve covers are included. The factory exhaust manifolds are included. Water Pump is included. I have also included the cam and crank sensor pig-tails in case you put it in an 04-05 model, you will need these.

No throttle body, PCM, wire harness, or oil pan as all this stuff was used on the truck the engine came from. Its ready for your choice of Cam, exhaust, Throttle body, rockers etc. Compression is still factory spec. It will make a wonderful NOS engine or Paxton/Turbo engine. I built it to use a Paxton on it. Anyway, I need it to go away. I need $3995 for this complete long block engine.

This engine is worth SO MUCH MORE!

This is a huge savings for whoever buys it. This engine is new and never been run. I will consider trades of any kind of value, but keep in mind, I'm selling so cheap, I would expect the buyer to be fair. I dont check my PM box very often so its best to call me at
(817)556-1133.

I am close to Fort Worth, Texas. I will be happy to help arrange shipping, if needed. I have a bunch of pics but i cant post them on here from my iPhone, unless someone can tell me how. If anyone wants pics just get me a number and I'll text them over, but only if you are serious about buying this engine, so PLEASE dont ask for pics unless your serious. Thanks for reading guys and sorry I had to jump the Viper Truck ship. Financial obligations forced it. Call me anytime. Robert
there i can read it now
__________________
Best 1/4 Mile In The 7'sssssss
  #6 (permalink)  
Old 12-13-2011, 05:23 PM
SANTEEN's Avatar
VIPER POWERED
Southeast VTCoA Regional Member
 
Join Date: May 2009
Location: Miami, Fl
Age: 47
Posts: 6,149
Member #10712
Quote:
Originally Posted by 505'sFastestViper. View Post
i could not read that paragraph sorry i started getting a fn headache!!!
Don't lie fugger. You can't read, period.
__________________
Steve
RIP Clint (flchub) you'll be missed brother
Proud member of the STFU choke-a-bitch tribe
60ft: 1.72
1/8th: 7.86 @87
1/4: 12.24 @113

2006 Mineral Gray QC 590whp/573wtq
Currently under contruction
Paxton, JTSVP fully built 48re, JTSVP 2400 Stall Converter, Snow Meth kit, Twin Walbro in-tank fuel pumps. Racetronix 65lb injectors, Mopar catback, JMB catless mids, SCT by Torrie at Unleashed Tuning, BBK TB, Caltracs,
  #7 (permalink)  
Old 12-13-2011, 05:24 PM
505'sFastestViper.'s Avatar
VIPER POWERED
Southwest VTCoA Regional Rep
 
Join Date: Apr 2007
Location: Farmington, N.M.
Age: 36
Posts: 13,812
Member #1557
Quote:
Originally Posted by SANTEEN View Post
Don't lie fugger. You can't read, period.
i an read
__________________
Best 1/4 Mile In The 7'sssssss
  #8 (permalink)  
Old 12-13-2011, 06:52 PM
ARRESTmeRed04's Avatar
VIPER POWERED
Southwest VTCoA Regional Member
 
Join Date: Nov 2007
Location: central texas
Age: 32
Posts: 5,878
Member #2894
What kind of compression would it be with stock heads, and how do you figure it'd be built to handle 12-15lbs boost with factory rods?
__________________
Red 04 ram srt10....10's
Silver 09 CTS-V.......12's
  #9 (permalink)  
Old 12-13-2011, 08:28 PM
viperhauler's Avatar
VIPER POWERED
Southeast VTCoA Regional Member
2013 Viper Truck of The Month
 
Join Date: Jul 2008
Location: ...in a van, down by the river...
Age: 34
Posts: 18,848
Member #6559
here's pics:
Attached Thumbnails
rob.jpeg   rob1.jpg   rob2.jpeg   rob3.jpeg   rob4.jpg   rob5.jpeg  
__________________
Dan-O
On the hunt...


Night Runner #327 JTSVP Forged 510 - soon to be blown
'05 QC Custom paint - coming soon
YF QC #270


SOLD: '96 GTS because trucks are life
SOLD: '04 Viper for sweet jumps
RIP: '04 RC - Scavenged to keep others alive
SOLD: '04 RC #1150/3057
RIP: '05 RC - Honorary 100k+ mile member


Quote:
Originally Posted by JeffBoyette View Post
Dan is always right. Its wise to take anything he writes as scripture...
Quote:
Originally Posted by bmxam962 View Post
Unfortunately for you guys I am taken and things are going well.
Quote:
Originally Posted by caveman View Post
Your Syclone is a great looking truck. I can see why you wanted it.
  #10 (permalink)  
Old 12-13-2011, 11:00 PM
amtrucker22's Avatar
VIPER POWERED
Southeast VTCoA Regional Member
 
Join Date: Mar 2007
Location: Pensacola, FL
Age: 45
Posts: 5,750
Member #1397
Send a message via MSN to amtrucker22
Quote:
Originally Posted by 505'sFastestViper. View Post
i could not read that paragraph sorry i started getting a fn headache!!!
I was thinking the same thing. But I am not looking for a engine so my attention span is a little shorter than most.
__________________
Paul
__________________
QC YF #285 - SOLD
QC YF #317 - SOLD
2006 GTO - SOLD
2012 JGC SRT8 -SOLD
Closed Thread

Bookmarks


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
10 Weeks to fix a Viper engine - WTF??? HDVIPER General Discussion 26 04-25-2007 05:22 PM
anyone look for ram srt10 on sales?? DRamSrt10 General Discussion 6 03-06-2007 03:36 PM
Ram Srt10 Drift DRamSrt10 Ram Srt-10 Racing 4 02-02-2007 09:30 PM
Video Exclusive: Dodge Viper SRT10 vs. Ram SRT10 Fast one Media Section 14 07-17-2006 08:02 PM
Performance Principles of Power and Acceleration Bone General Discussion 7 06-22-2006 05:42 PM





All times are GMT -4. The time now is 12:00 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
vB.Sponsors
This site is supported by its members, vendors, and administration. Vtcoa.com is in no way affiliated with Daimler Chrysler. Dodge, Viper,Ram SRT-10, the Viper logo and likeness are registered trademarks of Daimler Chrysler. The contents of this site are owned by Vtcoa.com and may not be used or reproduced without the express written permission of the Administrator.
GM Truck Forum
Ford Raptor Forums
Chevy Tahoe Forum
Chevy Cobalt Forum
Chevy Camaro Forum
Toyota FJ Cruiser Forum
Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Ford Expedition Forum
Chevy Equinox Forum
Chevy Cruze Forum
Jeep Liberty Forum
Jeep Forum
Dodge Ram Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum
Dodge Challenger Forum
Sotball Forums
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Cadillac Forum
Cadillac XTS Forum