Go Back   Dodge Ram SRT-10 Forum - Viper Truck Club of America > Main Forum > Forum Requests
Home Forum Register FAQ Members List Social Groups Calendar Garage Mark Forums Read

Forum Requests

Low rpm vibration

This is a discussion on Low rpm vibration within the Forum Requests forums, part of the Main Forum category!

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-06-2017, 03:30 PM
You got a Hemi?
Join Date: Nov 2017
Posts: 1
Member #18047
Low rpm vibration

I just bought a 2004 silver srt10 from its original owner. At idle it is very smooth and over 2200it smooths out but around 1500 a vibrating effect comes from the engine which is quite noticeable up to the low 2000ís. It is present with the clutch depressed or in neutral or standing still or in each gear as that rev range passes. Does anyone know what I should look for? We took it to the Dodge dealer where he bought and serviced it and they said thereís nothing wrong with it and many Viper engines do this. I have an old Chevelle with comparative horsepower but it stays smooth through the entire rev range. Otherwise itís a pampered completely unmolested low mileage gem and I plan to continue to care for it as he did. Hoping someone can help or point me to where I can get help on Long Island NY. Thanks in advance, Steve

Reply With Quote
  #2 (permalink)  
Old 11-06-2017, 04:44 PM
trussman's Avatar
Southeast VTCoA Regional Member
Join Date: Aug 2007
Location: Jacksonville, NC
Age: 35
Posts: 3,996
Member #2161
Send a message via Yahoo to trussman
Could be in need of a tune up.
Built by Royal purple. 501 hp/609 tq.
Reply With Quote
  #3 (permalink)  
Old 11-07-2017, 10:31 AM
Has Left the Room - Banned from VTCOA!
Southwest VTCoA Regional Member
Southwest VTCoA Regional Rep
2013 Viper Truck of The Month
Join Date: May 2009
Location: Wacko Waco,TX
Age: 44
Posts: 12,753
Member #10675
Could be an out of balance clutch disc. Felt it a few times before when a disc looses a puck/pad. Otherwise yup check plugs and wires. Also check vibration damper and ensure bolt is tight and damper isn't walking off crank.
Welcome to the madhouse
Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Error Codes The Itch General Discussion 16 04-22-2011 11:46 AM
New Owner Allen6piranna New Members Section 22 10-16-2008 07:43 AM
Does anybody know what a code 420 is? mosrt10 General Discussion 14 08-25-2008 06:17 PM
cel p0171 any help??? tripeph General Discussion 7 01-20-2008 09:58 PM

All times are GMT -4. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
This site is supported by its members, vendors, and administration. Vtcoa.com is in no way affiliated with Daimler Chrysler. Dodge, Viper,Ram SRT-10, the Viper logo and likeness are registered trademarks of Daimler Chrysler. The contents of this site are owned by Vtcoa.com and may not be used or reproduced without the express written permission of the Administrator.
GM Truck Forum
Ford Raptor Forums
Chevy Tahoe Forum
Chevy Cobalt Forum
Chevy Camaro Forum
Toyota FJ Cruiser Forum
Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Ford Expedition Forum
Chevy Equinox Forum
Chevy Cruze Forum
Jeep Liberty Forum
Jeep Forum
Dodge Ram Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum
Dodge Challenger Forum
Sotball Forums
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Cadillac Forum
Cadillac XTS Forum