Go Back   Dodge Ram SRT-10 Forum - Viper Truck Club of America > VTCOA Supporting Vendors > JTS Venom Performance
Home Forum Register FAQ Members List Social Groups Calendar Garage Mark Forums Read

JTS Venom Performance

Custom Splitter for 2004-2005 Ram SRT 10 QC/RC


This is a discussion on Custom Splitter for 2004-2005 Ram SRT 10 QC/RC within the JTS Venom Performance forums, part of the VTCOA Supporting Vendors category!
Originally Posted by Viper83101 Nothing. Just personal taste as far as the way its going to look when complete. Purely ...



Like Tree56Likes

Reply
 
LinkBack Thread Tools Display Modes
  #21 (permalink)  
Old 07-08-2015, 07:32 PM
mcdoogle1975's Avatar
Almost Senior Member
Northeast VTCoA Regional Member
 
Join Date: May 2014
Location: Frankfort, N.Y
Posts: 561
Member #14641
Quote:
Originally Posted by Viper83101 View Post
Nothing. Just personal taste as far as the way its going to look when complete. Purely aesthetic as far as our trucks go. On some cars people take the rods to the actual metal bumper support and may or may not need longer rods but with the way our front bumpers are, we can only go to the bumper
What ones do you have on yours?

__________________


MODS
NOVI 2000 SUPERCHARGER, VIPER LOW COMPRESSION C-P PISTON & RING KIT, MANLEY PRO BEAM RODS, FULL GASKET & SEAL SET W/COMETIC HEAD GASKET, VIPER BEARING SET, VIPER VALVE KEEPER SET, VIPER RACE-FLOW VALVES, PRO FLOW VALVE SPRINGS & TITANIUM RETAINER SET, BILLET MAIN CAPS, PORT AND POLISH CYLINDER HEADS, MULTI ANGLE VALVE JOB, BALANCED ROTATING ASSEMBLY, REGROUND CRANKSHAFT ROD PINS TO SBC BEARING SIZE, POLISHED MAINS & REWORKED OIL HOLES, CYLINDER HONE BLOCK, HARLAND SHARP ROLLER ROCKERS VIPER V10 1.7 RATIO, BILLET ALUMINUM SUPERCHARGER PULLEY, CUSTOM COMP CAM, CLEVIT BEARINGS, 180 DEGREE T-STAT, 1200 DEGREE SPARRK PLUG WIRES, BILLET WIRE SEPERATORS, JTSVP VIPER COIL PAK, BILLET VALVE COVER SPACERS,JTSVP SS OIL LINES, JTSVP SS POWER STEERING LINES, CUSTOM AIR/WATER INTERCOOLER SYSTEM, SS INTERCOOLER HOSE KIT, MPI TUNER, X-METAL SINGLE BLADE THROTTLE BODY, X-METAL BILLET FUEL RAILS, WELDON FUEL REGULATOR, JMB DUAL IN TANK FUEL PUMPS, SS FUEL LINES, X-METAL HEAT EXCHANGER, DC PEFORMANCE AIR INDUCTION BOX, JMB POWDER COATED VALVE COVERS, JMB POWDER COATED HARD RADIATOR PIPES, JMB POWDER COATED OIL CATCH CAN, JMB POWDER COATED COOLANT RESERVOIR, JMB POWDER COATED WW RESERVOIR, LMB POWDER COATED HURST LINE LOCK, BASSANI SHORTY CERAMIC COATED HEADERS, X-METAL 3 INCH MIDPIPES NO CATS, B&B SS CAT BACK EXHAUST 3 INCH.
Reply With Quote
  #22 (permalink)  
Old 07-08-2015, 07:47 PM
Viper83101's Avatar
Almost Senior Member
 
Join Date: Apr 2014
Location: Georgia
Posts: 640
Member #14589
Quote:
Originally Posted by mcdoogle1975 View Post
What ones do you have on yours?
I have the longer rods on mine
Reply With Quote
  #23 (permalink)  
Old 07-08-2015, 07:51 PM
mcdoogle1975's Avatar
Almost Senior Member
Northeast VTCoA Regional Member
 
Join Date: May 2014
Location: Frankfort, N.Y
Posts: 561
Member #14641
Quote:
Originally Posted by Viper83101 View Post
I have the longer rods on mine
That's what I'm looking for
So that's option 2 with the longer adjustable rods correct?
__________________


MODS
NOVI 2000 SUPERCHARGER, VIPER LOW COMPRESSION C-P PISTON & RING KIT, MANLEY PRO BEAM RODS, FULL GASKET & SEAL SET W/COMETIC HEAD GASKET, VIPER BEARING SET, VIPER VALVE KEEPER SET, VIPER RACE-FLOW VALVES, PRO FLOW VALVE SPRINGS & TITANIUM RETAINER SET, BILLET MAIN CAPS, PORT AND POLISH CYLINDER HEADS, MULTI ANGLE VALVE JOB, BALANCED ROTATING ASSEMBLY, REGROUND CRANKSHAFT ROD PINS TO SBC BEARING SIZE, POLISHED MAINS & REWORKED OIL HOLES, CYLINDER HONE BLOCK, HARLAND SHARP ROLLER ROCKERS VIPER V10 1.7 RATIO, BILLET ALUMINUM SUPERCHARGER PULLEY, CUSTOM COMP CAM, CLEVIT BEARINGS, 180 DEGREE T-STAT, 1200 DEGREE SPARRK PLUG WIRES, BILLET WIRE SEPERATORS, JTSVP VIPER COIL PAK, BILLET VALVE COVER SPACERS,JTSVP SS OIL LINES, JTSVP SS POWER STEERING LINES, CUSTOM AIR/WATER INTERCOOLER SYSTEM, SS INTERCOOLER HOSE KIT, MPI TUNER, X-METAL SINGLE BLADE THROTTLE BODY, X-METAL BILLET FUEL RAILS, WELDON FUEL REGULATOR, JMB DUAL IN TANK FUEL PUMPS, SS FUEL LINES, X-METAL HEAT EXCHANGER, DC PEFORMANCE AIR INDUCTION BOX, JMB POWDER COATED VALVE COVERS, JMB POWDER COATED HARD RADIATOR PIPES, JMB POWDER COATED OIL CATCH CAN, JMB POWDER COATED COOLANT RESERVOIR, JMB POWDER COATED WW RESERVOIR, LMB POWDER COATED HURST LINE LOCK, BASSANI SHORTY CERAMIC COATED HEADERS, X-METAL 3 INCH MIDPIPES NO CATS, B&B SS CAT BACK EXHAUST 3 INCH.
Reply With Quote
  #24 (permalink)  
Old 07-08-2015, 07:54 PM
Viper83101's Avatar
Almost Senior Member
 
Join Date: Apr 2014
Location: Georgia
Posts: 640
Member #14589
Quote:
Originally Posted by mcdoogle1975 View Post
That's what I'm looking for
So that's option 2 with the longer adjustable rods correct?
Yes sir that's correct.
Reply With Quote
  #25 (permalink)  
Old 07-08-2015, 07:57 PM
mcdoogle1975's Avatar
Almost Senior Member
Northeast VTCoA Regional Member
 
Join Date: May 2014
Location: Frankfort, N.Y
Posts: 561
Member #14641
Quote:
Originally Posted by Viper83101 View Post
Yes sir that's correct.
Excellent. .....placing my order now.....Thanks brother
__________________


MODS
NOVI 2000 SUPERCHARGER, VIPER LOW COMPRESSION C-P PISTON & RING KIT, MANLEY PRO BEAM RODS, FULL GASKET & SEAL SET W/COMETIC HEAD GASKET, VIPER BEARING SET, VIPER VALVE KEEPER SET, VIPER RACE-FLOW VALVES, PRO FLOW VALVE SPRINGS & TITANIUM RETAINER SET, BILLET MAIN CAPS, PORT AND POLISH CYLINDER HEADS, MULTI ANGLE VALVE JOB, BALANCED ROTATING ASSEMBLY, REGROUND CRANKSHAFT ROD PINS TO SBC BEARING SIZE, POLISHED MAINS & REWORKED OIL HOLES, CYLINDER HONE BLOCK, HARLAND SHARP ROLLER ROCKERS VIPER V10 1.7 RATIO, BILLET ALUMINUM SUPERCHARGER PULLEY, CUSTOM COMP CAM, CLEVIT BEARINGS, 180 DEGREE T-STAT, 1200 DEGREE SPARRK PLUG WIRES, BILLET WIRE SEPERATORS, JTSVP VIPER COIL PAK, BILLET VALVE COVER SPACERS,JTSVP SS OIL LINES, JTSVP SS POWER STEERING LINES, CUSTOM AIR/WATER INTERCOOLER SYSTEM, SS INTERCOOLER HOSE KIT, MPI TUNER, X-METAL SINGLE BLADE THROTTLE BODY, X-METAL BILLET FUEL RAILS, WELDON FUEL REGULATOR, JMB DUAL IN TANK FUEL PUMPS, SS FUEL LINES, X-METAL HEAT EXCHANGER, DC PEFORMANCE AIR INDUCTION BOX, JMB POWDER COATED VALVE COVERS, JMB POWDER COATED HARD RADIATOR PIPES, JMB POWDER COATED OIL CATCH CAN, JMB POWDER COATED COOLANT RESERVOIR, JMB POWDER COATED WW RESERVOIR, LMB POWDER COATED HURST LINE LOCK, BASSANI SHORTY CERAMIC COATED HEADERS, X-METAL 3 INCH MIDPIPES NO CATS, B&B SS CAT BACK EXHAUST 3 INCH.
Reply With Quote
  #26 (permalink)  
Old 07-08-2015, 08:09 PM
Viper83101's Avatar
Almost Senior Member
 
Join Date: Apr 2014
Location: Georgia
Posts: 640
Member #14589
Quote:
Originally Posted by mcdoogle1975 View Post
Excellent. .....placing my order now.....Thanks brother
Not a problem man. Just send payment to the above listed paypal email address to place the order. Write your name, splitter options and shipping address in the memo section of the paypal payment. Thanks
Reply With Quote
  #27 (permalink)  
Old 07-08-2015, 09:47 PM
JaysSRT10's Avatar
VTCoA Board
Midwest VTCoA Regional Rep
 
Join Date: Nov 2011
Location: Vermilion Ohio
Posts: 1,528
Member #12707
What is this splitter made out of?
__________________
04 SRT-10 RAM #796
BBK tb, K&N CAI, X-Metal 2/3 drop kit, JTSVP oil lines, Line-X, OEM Honey comb grills, JMB Gen 3 grill emblem, Energy Suspension red bushings, tinted door glass, color matched door/tailgate handles & antenna base, Viper logo keys.
Reply With Quote
  #28 (permalink)  
Old 07-08-2015, 09:51 PM
Viper83101's Avatar
Almost Senior Member
 
Join Date: Apr 2014
Location: Georgia
Posts: 640
Member #14589
Quote:
Originally Posted by JaysSRT10 View Post
What is this splitter made out of?
Its made out of a sheet of alumalite. Its 2 thin pieces of powdercoated aluminum with a plastic composite sandwiched between them. Really light weight but also rigid
SRT-10 Ralph likes this.
Reply With Quote
  #29 (permalink)  
Old 07-08-2015, 09:53 PM
mcdoogle1975's Avatar
Almost Senior Member
Northeast VTCoA Regional Member
 
Join Date: May 2014
Location: Frankfort, N.Y
Posts: 561
Member #14641
Quote:
Originally Posted by Viper83101 View Post
Not a problem man. Just send payment to the above listed paypal email address to place the order. Write your name, splitter options and shipping address in the memo section of the paypal payment. Thanks
Order placed and payment sent!!!! Thanks again
__________________


MODS
NOVI 2000 SUPERCHARGER, VIPER LOW COMPRESSION C-P PISTON & RING KIT, MANLEY PRO BEAM RODS, FULL GASKET & SEAL SET W/COMETIC HEAD GASKET, VIPER BEARING SET, VIPER VALVE KEEPER SET, VIPER RACE-FLOW VALVES, PRO FLOW VALVE SPRINGS & TITANIUM RETAINER SET, BILLET MAIN CAPS, PORT AND POLISH CYLINDER HEADS, MULTI ANGLE VALVE JOB, BALANCED ROTATING ASSEMBLY, REGROUND CRANKSHAFT ROD PINS TO SBC BEARING SIZE, POLISHED MAINS & REWORKED OIL HOLES, CYLINDER HONE BLOCK, HARLAND SHARP ROLLER ROCKERS VIPER V10 1.7 RATIO, BILLET ALUMINUM SUPERCHARGER PULLEY, CUSTOM COMP CAM, CLEVIT BEARINGS, 180 DEGREE T-STAT, 1200 DEGREE SPARRK PLUG WIRES, BILLET WIRE SEPERATORS, JTSVP VIPER COIL PAK, BILLET VALVE COVER SPACERS,JTSVP SS OIL LINES, JTSVP SS POWER STEERING LINES, CUSTOM AIR/WATER INTERCOOLER SYSTEM, SS INTERCOOLER HOSE KIT, MPI TUNER, X-METAL SINGLE BLADE THROTTLE BODY, X-METAL BILLET FUEL RAILS, WELDON FUEL REGULATOR, JMB DUAL IN TANK FUEL PUMPS, SS FUEL LINES, X-METAL HEAT EXCHANGER, DC PEFORMANCE AIR INDUCTION BOX, JMB POWDER COATED VALVE COVERS, JMB POWDER COATED HARD RADIATOR PIPES, JMB POWDER COATED OIL CATCH CAN, JMB POWDER COATED COOLANT RESERVOIR, JMB POWDER COATED WW RESERVOIR, LMB POWDER COATED HURST LINE LOCK, BASSANI SHORTY CERAMIC COATED HEADERS, X-METAL 3 INCH MIDPIPES NO CATS, B&B SS CAT BACK EXHAUST 3 INCH.
Reply With Quote
  #30 (permalink)  
Old 07-08-2015, 09:54 PM
Viper83101's Avatar
Almost Senior Member
 
Join Date: Apr 2014
Location: Georgia
Posts: 640
Member #14589
Quote:
Originally Posted by mcdoogle1975 View Post
Order placed and payment sent!!!! Thanks again
Recieved. Thanks brother
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modded RT Ram vs Stock 2005 SRT10 Ram LETHAL HEMI Ram Srt-10 Racing 12 08-21-2014 08:15 AM
2004 dodge srt 10viper clutch work on a 2004 dodgre ram srt 10 srt10this Performance Mods 0 09-18-2009 03:36 PM
whats this could it be tn big jeff General Discussion 4 05-09-2009 10:59 AM
Is anyone in need of a complete B&B exhaust system for a SB SRT Ram? Heffner Performance SRT-10 Trucks and Parts For Sale 20 06-13-2007 01:22 AM





All times are GMT -4. The time now is 02:02 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
vB.Sponsors
This site is supported by its members, vendors, and administration. Vtcoa.com is in no way affiliated with Daimler Chrysler. Dodge, Viper,Ram SRT-10, the Viper logo and likeness are registered trademarks of Daimler Chrysler. The contents of this site are owned by Vtcoa.com and may not be used or reproduced without the express written permission of the Administrator.
GM Truck Forum
Ford Raptor Forums
Chevy Tahoe Forum
Chevy Cobalt Forum
Chevy Camaro Forum
Toyota FJ Cruiser Forum
Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Ford Expedition Forum
Chevy Equinox Forum
Chevy Cruze Forum
Jeep Liberty Forum
Jeep Forum
Dodge Ram Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum
Dodge Challenger Forum
Sotball Forums
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Cadillac Forum
Cadillac XTS Forum