Dodge Ram SRT-10 Forum - Viper Truck Club of America

Dodge Ram SRT-10 Forum - Viper Truck Club of America (http://www.vtcoa.com/forums/)
-   General Discussion (http://www.vtcoa.com/forums/f7/)
-   -   Rear Gear Oil Change (http://www.vtcoa.com/forums/f7/rear-gear-oil-change-46854/)

Jfireboy1 12-25-2010 01:32 PM

Rear Gear Oil Change
 
Changing the rear gear oil today and am using 75-90 wt mobil1 synthetic gear oil. there are 3 holes on the rear end cover. obviously the bottom is to drain the oil but do i fill it to the middle hole or the top hole on the cover. do i add the slip additive in first or the gear oil. the mobil one says it already has it in it but was told to add about five ounces of additive just dont know before or after i put the gear oil. Thanks for input. :dontknow:

FATJACK 12-25-2010 02:14 PM

3 quarts total, should be the middle hole. Additive anytime.

Jfireboy1 12-25-2010 02:19 PM

Thank you very much kind sir.

FATJACK 12-25-2010 02:27 PM

Anytime, I love your truck. Beautiful...

Jfireboy1 12-25-2010 02:40 PM

Thanks! Getting ready to put in one of Tonys torque converters, and switching from a split second fuel management system to an sct. Also going with the electric fan set up from jmb. Going with watercooled turbos instead of the oiled cooled that I currently have

Slitherbeast 12-25-2010 02:54 PM

yea nice truck!!! i would put the additive in first so you know for sure it goes in. then fill to the middle hole starts to leak!! have fun!! the gear oil can get really stinky so leave the door open!

Jfireboy1 12-25-2010 05:24 PM

Lol! Yeah I found that out! :D

Troy's QC SRT 12-25-2010 05:32 PM

soon as you drive it its going to mix up so it really doesnt matter!!


All times are GMT -4. The time now is 07:01 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
vB.Sponsors
This site is supported by its members, vendors, and administration. Vtcoa.com is in no way affiliated with Daimler Chrysler. Dodge, Viper,Ram SRT-10, the Viper logo and likeness are registered trademarks of Daimler Chrysler. The contents of this site are owned by Vtcoa.com and may not be used or reproduced without the express written permission of the Administrator.