Go Back   Dodge Ram SRT-10 Forum - Viper Truck Club of America > Viper Truck SRT-10 Discussion > General Discussion
Home Forum Register FAQ Members List Social Groups Calendar Garage Mark Forums Read

General Discussion

Rear Gear Oil Change


This is a discussion on Rear Gear Oil Change within the General Discussion forums, part of the Viper Truck SRT-10 Discussion category!
Changing the rear gear oil today and am using 75-90 wt mobil1 synthetic gear oil. there are 3 holes on ...




Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-25-2010, 02:32 PM
Jfireboy1's Avatar
Senior Member
Southeast VTCoA Regional Member
 
Join Date: Jan 2010
Location: Miami, Fla
Posts: 1,009
Member #11321
Rear Gear Oil Change

Changing the rear gear oil today and am using 75-90 wt mobil1 synthetic gear oil. there are 3 holes on the rear end cover. obviously the bottom is to drain the oil but do i fill it to the middle hole or the top hole on the cover. do i add the slip additive in first or the gear oil. the mobil one says it already has it in it but was told to add about five ounces of additive just dont know before or after i put the gear oil. Thanks for input.

__________________
2006 RAM SRT10 TWIN TURBO
CUSTOM TURBOS, SUNCOAST TRANNY, FORGED ENGINE
Reply With Quote
  #2 (permalink)  
Old 12-25-2010, 03:14 PM
FATJACK's Avatar
VIPER POWERED
Southeast VTCoA Regional Member
2012 Viper Truck of The Month
 
Join Date: Aug 2006
Location: Chattanooga, Tn.
Age: 68
Posts: 15,977
Member #520
3 quarts total, should be the middle hole. Additive anytime.
__________________
Second Fastest 60' on this forum (1.54) NEW Best Time 7.28 @ 94.5 mph 2005 R/C, 602 RWHP
X-Metal 1/2 Lowering kit, B&M Shifter, X-Metal TB, Bassanis, Torries SCT Tuner, Cat delete,
Detroit Locker Center Section,Strange 35 spline Axles, Wilwood Brakes, M&H Nostalgia Slicks,
Cal-Tracs, 4.56 gears Cold Fusion Nitrous system, Viper clutch hydraulics, JMB CAI, Catch Can,Line Loc Tick Transmission modified T-56
Reply With Quote
  #3 (permalink)  
Old 12-25-2010, 03:19 PM
Jfireboy1's Avatar
Senior Member
Southeast VTCoA Regional Member
 
Join Date: Jan 2010
Location: Miami, Fla
Posts: 1,009
Member #11321
Thank you very much kind sir.
__________________
2006 RAM SRT10 TWIN TURBO
CUSTOM TURBOS, SUNCOAST TRANNY, FORGED ENGINE
Reply With Quote
  #4 (permalink)  
Old 12-25-2010, 03:27 PM
FATJACK's Avatar
VIPER POWERED
Southeast VTCoA Regional Member
2012 Viper Truck of The Month
 
Join Date: Aug 2006
Location: Chattanooga, Tn.
Age: 68
Posts: 15,977
Member #520
Anytime, I love your truck. Beautiful...
__________________
Second Fastest 60' on this forum (1.54) NEW Best Time 7.28 @ 94.5 mph 2005 R/C, 602 RWHP
X-Metal 1/2 Lowering kit, B&M Shifter, X-Metal TB, Bassanis, Torries SCT Tuner, Cat delete,
Detroit Locker Center Section,Strange 35 spline Axles, Wilwood Brakes, M&H Nostalgia Slicks,
Cal-Tracs, 4.56 gears Cold Fusion Nitrous system, Viper clutch hydraulics, JMB CAI, Catch Can,Line Loc Tick Transmission modified T-56
Reply With Quote
  #5 (permalink)  
Old 12-25-2010, 03:40 PM
Jfireboy1's Avatar
Senior Member
Southeast VTCoA Regional Member
 
Join Date: Jan 2010
Location: Miami, Fla
Posts: 1,009
Member #11321
Thanks! Getting ready to put in one of Tonys torque converters, and switching from a split second fuel management system to an sct. Also going with the electric fan set up from jmb. Going with watercooled turbos instead of the oiled cooled that I currently have
__________________
2006 RAM SRT10 TWIN TURBO
CUSTOM TURBOS, SUNCOAST TRANNY, FORGED ENGINE
Reply With Quote
  #6 (permalink)  
Old 12-25-2010, 03:54 PM
Slitherbeast's Avatar
Twin Turbo, Forged
Canadian VTCoA Regional Member
 
Join Date: Sep 2007
Location: Alberta
Posts: 2,218
Member #2340
yea nice truck!!! i would put the additive in first so you know for sure it goes in. then fill to the middle hole starts to leak!! have fun!! the gear oil can get really stinky so leave the door open!
__________________
"Haters don't really hate you, they hate themselves cause you're a reflection of what they wish to be".


#993 04 blk RC 4.56 gears,Harland Sharp Rockers,3/8" Hardened Pushrods, PSI Valve Springs,,Striker Valve Cover Spacers, JMB catless mids,Magnaflow Catback, Torries' Tune,B&M Shifter,Stinker's Extreme Lowering Kit, Caltracs,Catchcan, Forged Wiseco Pistons,Molnar Rods, Clevite Bearings.Center Force Clutch,Cometics Head Gaskets,ARP Head Studs , Pioneer X950BH Double Din , Grants Steering Wheel .And the list continues......
Reply With Quote
  #7 (permalink)  
Old 12-25-2010, 06:24 PM
Jfireboy1's Avatar
Senior Member
Southeast VTCoA Regional Member
 
Join Date: Jan 2010
Location: Miami, Fla
Posts: 1,009
Member #11321
Lol! Yeah I found that out!
__________________
2006 RAM SRT10 TWIN TURBO
CUSTOM TURBOS, SUNCOAST TRANNY, FORGED ENGINE
Reply With Quote
  #8 (permalink)  
Old 12-25-2010, 06:32 PM
Troy's QC SRT's Avatar
VIPER POWERED
 
Join Date: Feb 2010
Location: Virginia
Age: 34
Posts: 3,345
Member #11341
soon as you drive it its going to mix up so it really doesnt matter!!
__________________

RWHP 451/ 477 RWTQ

Sold June 6, 2011!

Bought a Black 2003 Mustang Cobra Coupe "build in progress, should be over 600RWHP!"
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
oil leak part 3/ gear decision mauiSRT/10 General Discussion 11 06-04-2015 07:53 PM
Official Oil Thread 505'sFastestViper. General Discussion 11 03-24-2011 09:27 PM
transmission oil change Houstonsrt10 General Discussion 10 03-08-2010 08:07 PM
oil change flchub General Discussion 13 07-28-2007 10:48 AM
Oil Change? MacccDaddy General Discussion 12 06-27-2006 12:40 PM





All times are GMT -4. The time now is 02:05 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
vB.Sponsors
This site is supported by its members, vendors, and administration. Vtcoa.com is in no way affiliated with Daimler Chrysler. Dodge, Viper,Ram SRT-10, the Viper logo and likeness are registered trademarks of Daimler Chrysler. The contents of this site are owned by Vtcoa.com and may not be used or reproduced without the express written permission of the Administrator.
GM Truck Forum
Ford Raptor Forums
Chevy Tahoe Forum
Chevy Cobalt Forum
Chevy Camaro Forum
Toyota FJ Cruiser Forum
Ford Truck Forum
88-98 GM Truck Forum
73-87 Gm Truck Forum
Ford Expedition Forum
Chevy Equinox Forum
Chevy Cruze Forum
Jeep Liberty Forum
Jeep Forum
Dodge Ram Forum
Chrysler 200 Forum
Scion xD Forum
Scion xB Forum
Dodge Challenger Forum
Sotball Forums
SRT Forum
Nissan Titan Forum
Buick Enclave Forum
Cadillac Forum
Cadillac XTS Forum