Bravo
New Member
Just received my 4.88 set from Devin at Unitrax. I'm tech savvy and have my own lift, press, etc. Worked for years as a mechanic and wrenched on superbikes in the 80's so I'm ready to do this myself as I've done numerous GM swaps in my youth. I putter around the garage now for fun.
Looking for instructions / guidance / torque values / schematics / links etc....
as I know some remove the slingers and make up for it with .050" extra pinion stack.....
Little disturbed that Maui seems to be missing bearings. I haven't opened my box other than to make sure what it was. I'm assuming that the pinion bearings now are reused and just carrier bearings are supplied.
Just want to be fully informed before opening the patient.
-J
Looking for instructions / guidance / torque values / schematics / links etc....
as I know some remove the slingers and make up for it with .050" extra pinion stack.....
Little disturbed that Maui seems to be missing bearings. I haven't opened my box other than to make sure what it was. I'm assuming that the pinion bearings now are reused and just carrier bearings are supplied.
Just want to be fully informed before opening the patient.
-J
