Ram From Hell's Garage Sale

In an effort to raise dough for the Procharger R&D, I've gone through the shop and gathered up some gear that needs to go. All proceeds will be going into the pockets of one of the forum's finest vendor's, JMB.:rock:

Figure S&H from the Seattle area if not picking up. Paypal OK +3%. I tried to price this stuff right, but PM me if you see a price that's out of line. It's been awhile since I bought some of this stuff.

Please PM if you want to buy something, but do post up on the thread if you have questions (so everyone gets the benefit of the Q&A).

Factory subwoofer (excellent condition) $150.00
Factory heads (used) $600.00
Powder coated valve covers, black (one corner clearanced for Paxton) $200.00
Factory oil cooler lines (new) $50.00
Killer Chiller (intended for the Paxton intercooler) water chiller (no temp gauge), hand-polished drier, drops intercooler water temps by 50* (new) $500.00
FJO dual channel wideband AFR, gauge, O2 sensors, O2 cable extenders (new) $400.00
FJO boost guage (new, just add sending unit) $100.00
FJO dual channel wideband AFR, gauge, O2 sensors, O2 cable extenders (used) $300.00
FJO boost guage and sending unit (used) $100.00
2ea red Sneaky Pete emblems, fender sized, curved (new) $20.00ea
2ea Mopar 104050 O2 sims, plug-in (no hacking the wiring harness!)(new) $20.00ea SOLD
2ea valve cover gaskets (new) $10.00ea
MSD plug wires w/ Cool Sox (wires have dyno time only, Sox are new) $100.00 SOLD
Gen I X-metal shifter (new) $100.00
Billet shifter arm w/ "SRT-10" machined into it (new) $20.00
Carbon fiber hood (new, prefer pick up) $750.00
Carbon fiber shifter handle (new) $50.00
A-pillar 3-gauge cluster (new) $20.00 SOLD
Mopar/Borla cat back system, RC, (UPDATE: NEW IN BOX) $300.00 SOLD

Late addition: 2 Sylvania pure white headlight lamps and 2 factory driving light lamps (used) $20.00

FJO products link: http://www.fjoracing.com/products.php
Killer Chiller link: http://www.killerchiller.com/

Let me know if you need to see pictures of anything not shown below.

Can i get pics of the hood, as well as both shifter arms? Thanks

FYI, I have bought from Eric before. Standup guy! You will get (more than) what you paid for with him.

Eric,

PM sent on the sims.

Bone

Here are pictures of the shifter, extra arm, and hood. All parts are flawless. The two shifter arms are basically identical in finish, just caught the flash differently.

very interested in the mopar cat back, can you send me some pics? how many miles? shipping would be to 20650. dibs pending pics!
also p.m. sent

pm sent

Please send me a price on the billet shifter arm shipped to 32571. Any pics of the carbon fiber shifter handle? Thanks.

MOPAR/BORLA EXHAUST

Guys, I think this system is new. The clamps don't have any wear, there's no carbon visible inside... Unless the last owner installed it with magic, and ran hydrogen, it must be new.

CARBON FIBER PISTOL GRIP

John02SS said:

Please send me a price on the billet shifter arm shipped to 32571. Any pics of the carbon fiber shifter handle? Thanks.

Click to expand...

SOLD!

oops. the exhaust that is.

check your pm's

a pilar pods gone and sneaky pete (1) sold too.

I'll take the billet shifter arm with the SRT-10 Machined into it.

Figure S&H from the Seattle area if not picking up. Paypal OK +3%. I tried to price this stuff right, but PM me if you see a price that's out of line. It's been awhile since I bought some of this stuff.

Please PM if you want to buy something, but do post up on the thread if you have questions (so everyone gets the benefit of the Q&A).

Factory subwoofer (excellent condition) $150.00
Factory heads (used) $600.00
Powder coated valve covers, black (one corner clearanced for Paxton) $200.00
Factory oil cooler lines (new) $50.00
Killer Chiller (intended for the Paxton intercooler) water chiller (no temp gauge), hand-polished drier, drops intercooler water temps by 50* (new) $500.00
FJO dual channel wideband AFR, gauge, O2 sensors, O2 cable extenders (new) $400.00
FJO boost guage (new, just add sending unit) $100.00
FJO dual channel wideband AFR, gauge, O2 sensors, O2 cable extenders (used) $300.00
FJO boost guage and sending unit (used) $100.00
2ea red Sneaky Pete emblems, fender sized, curved (new) $20.00ea
2ea Mopar 104050 O2 sims, plug-in (no hacking the wiring harness!)(new) $20.00ea SOLD
2ea valve cover gaskets (new) $10.00ea
MSD plug wires w/ Cool Sox (wires have dyno time only, Sox are new) $100.00 SOLD
Gen I X-metal shifter (new) $100.00
Billet shifter arm w/ "SRT-10" machined into it (new) $20.00 SOLD
Carbon fiber hood (new, prefer pick up) $750.00
Carbon fiber shifter handle (new) $50.00
A-pillar 3-gauge cluster (new) $20.00 SOLD
Mopar/Borla cat back system, RC, (UPDATE: NEW IN BOX) $300.00 SOLD

Late addition: 2 Sylvania pure white headlight lamps and 2 factory driving light lamps (used) $20.00

Rammy rocks:rock: :rock:

I'll take these:

2ea red Sneaky Pete emblems, fender sized, curved (new) $20.00ea

Let me know how much to paypal you.

--wes

Damn my pm was late on the exhaust..................

Eric, will you take $150 for the valve covers?:dontknow:

Figure S&H from the Seattle area if not picking up. Paypal OK +3%. I tried to price this stuff right, but PM me if you see a price that's out of line. It's been awhile since I bought some of this stuff.

Please PM if you want to buy something, but do post up on the thread if you have questions (so everyone gets the benefit of the Q&A).

HERE'S WHAT'S LEFT:

Factory subwoofer (excellent condition) $150.00
Factory heads (used) $600.00
Powder coated valve covers, black (one corner clearanced for Paxton) $200.00
Factory oil cooler lines (new) $50.00
Killer Chiller (intended for the Paxton intercooler) water chiller (no temp gauge), hand-polished drier, drops intercooler water temps by 50* (new) $500.00
FJO dual channel wideband AFR, gauge, O2 sensors, O2 cable extenders (new) $400.00
FJO boost guage (new, just add sending unit) $100.00
FJO dual channel wideband AFR, gauge, O2 sensors, O2 cable extenders (used) $300.00
FJO boost guage and sending unit (used) $100.00
2ea valve cover gaskets (new) $10.00ea
Gen I X-metal shifter (new) $100.00
Carbon fiber hood (new, prefer pick up, but could ship) $750.00
Carbon fiber shifter handle (new) $50.00
2 Sylvania pure white headlight lamps and 2 factory driving light lamps (used) $20.00

figured id ask here first...the shifter...says gen I...that means theres a gen 2 or 3?...so its the first "version"...any better than stock? im not too familiar with xmetal...sorry