ram hood emblem

[JaysSRT10]

how hard is it to remove? I didnt see any mounting studs on the underside of the grill, so is it just 2-sided taped on?

 

[Midnight Runner]

It's like a glue. Doing mine today.

 

[JaysSRT10]

It's like a glue. Doing mine today.

ok, let me know how hard it is to remove.

 

[Midnight Runner]

Will do, going to do it right now. Be back.lol

 

[JeffBoyette]

I did mine a few weeks ago. On my 06.... It was a bitch. You will ruin it in the process
the Chrome goat comes loose from the black background. Dont pry against the recess.

I used a flat head screwdriver that had horizontal ridges on the flat and it gripped pretty good. Just put some good pressure on it and keep pulling, it will slowly start to creep off. Getting the glue left behind was the worse. A little heat and microfiber soaked in denatured alchohol did the trick for me.

 

[Midnight Runner]

I'm done. pm me your phone# if you like and i'll send you some pics of step by step. If you like.

 

[JeffBoyette]

2:56-3:07 Thats a record Midnight Runner!!!

2:56 Decide to take off emblem, post on thread
2:57 Grab beer from fridge
2:58 Admire truck and stare at emblem
2:59 Still admiring
3:00 Look at empty beer
3:01 Yell for wife to bring new beer "Wench.... more BEER!"
3:02 Ask why its not open
3:03 Chug second beer
3:04 Bang bottom of beer on top of emblem (emblem pops off)
3:05 walk in house
3:06 Throw away beer
3:07 Brag about accomplishment

 

[Midnight Runner]

LOL Now i'm getting the viper logo one from Tony chormed.

 

[Midnight Runner]

Just did the one on the tailgate also.

 

[RAMDUDE]

took me under a min, screwdriver, and popped it off.

 

[JaysSRT10]

Awesome, thanks guys. I'm looking at buying the small Viper emblem
on ebay ( b-day present from wife) to replace the ram emblem
on the grill

 

[JTS VENOM PERFORMANCE]

jsut do it like ramdude did

take a large 2 ft flat head screwdriver, insert it under one end of the emblem

then take a nice rubber 2 lb hammer, and hit the end of the screwdriver hard as you can,

pops right off

 

[RAMDUDE]

jsut do it like ramdude did

take a large 2 ft flat head screwdriver, insert it under one end of the emblem

then take a nice rubber 2 lb hammer, and hit the end of the screwdriver hard as you can,

pops right off

2ft lol, na it was a small flat head was not drinking that day bro.


tony had to pull it off to put your badge on there :aetsch:

 

[Midnight Runner]

LMAO. pics are on the way.

 

[RAMDUDE]

LMAO. pics are on the way.

did you use a pry bar

 

[RAMDUDE]

Awesome, thanks guys. I'm looking at buying the small Viper emblem
on ebay ( b-day present from wife) to replace the ram emblem
on the grill

tony sells them also bro. Just saying if ya didn't know.

 

[JTS VENOM PERFORMANCE]

2ft lol, na it was a small flat head was not drinking that day bro.


tony had to pull it off to put your badge on there :aetsch:

LOL knew it had to be a flat head LOL:toilet:

 

[Midnight Runner]

Jackhammer. lol

 

[JTS VENOM PERFORMANCE]

 

[Midnight Runner]

LMAO, call you soon.