Blackbetty's Recent Activity

  1. Blackbetty liked Wifey's post in the thread hood scoop.

    Whoda thunk???? YIKES I never knew it was a separate piece. Good luck with the fix!

    Apr 24, 2019 at 11:23 PM
  2. Blackbetty liked Wifey's post in the thread hood scoop.

    https://theviperstore.com/RAM-SRT10_Products_Parts&Upgrades_Replacement_Hood_&_Grille.htm

    Apr 24, 2019 at 11:23 PM
  3. Blackbetty replied to the thread hood scoop.

    I found that site as well, but they are still paint to match unfortunately I'll be fixing with epoxy and see if it will take the beating...

    Apr 24, 2019 at 11:23 PM
  4. Blackbetty replied to the thread hood scoop.

    I bought some JB weld, I was going to do plastic bond epoxy but it had a lower temp rating of only 180°F I'll send updated pics when...

    Apr 24, 2019 at 12:58 PM
  5. Blackbetty liked ckjarr's post in the thread hood scoop.

    I just drilled through the two outer studs and installed a couple panel fasteners through the top as a temporary fix till I get the...

    Apr 24, 2019 at 12:55 PM
  6. Blackbetty replied to the thread hood scoop.

    well the studs went through the hood with metal nut like fasteners. the studs are gone and I am thinking about jb wield or epoxy

    Apr 21, 2019 at 8:30 PM
  7. Blackbetty replied to the thread hood scoop.

    curious, keep me in this loop of progress lol

    Apr 21, 2019 at 7:37 PM
  8. Blackbetty replied to the thread hood scoop.

    would a 3d printer even be able to do threads that size?

    Apr 21, 2019 at 7:13 PM
  9. Blackbetty replied to the thread hood scoop.

    I don't know if it is different for other years but the ram air scoop on mine is a separate component

    Apr 20, 2019 at 8:41 PM
  10. Blackbetty attached a file to the thread hood scoop.

    no there are 4 plastic studs that hold the insert to the hood it's self. the wind ripped all 4 off and removed it forcefully from my hood.

    15558070981671454741820.jpg 1555807201265222015997.jpg Apr 20, 2019 at 8:39 PM
  11. Blackbetty replied to the thread TQ for universal joint?.

    any one know the part number for the universal joints? I can find any I popped mine out and ran into every auto part store and pulled...

    Apr 20, 2019 at 8:34 PM