Recent content by Donzi33z

Did you make it adjustable? Could have a valve hitting piston

You may have something on top of a piston pull plugs and get a scope and look in each cylinder The cam sensor if out of adjustment should only allow 180 degrees and its plastic so a breaker bar will usually bust the cam gear through it Did you drop the pan? Listen for a clunk while turning and...

Id do a BG injection clean.

Shocks Change Brake Fluid Change Coolant Send me the heads so I can open up and polish the exhaust ports.

Open heater to max heat to get all the air out When you get heat you will know the air is purged from the system

Remove valve covers take the tin plate out of the inside and inspect the wadding Its probably packed with goo. The wadding is not serviceable and is made of nylon and breaks apart if you try to clean it I replace mine with steel wool and works well

Yes you do need to be concerned about lifter taping and here's why. The camshaft is nodular iron with what appears to be a chrome or nickel coating on the lobes Liter tapping will take out the lobes. I had to replace a cam last year because of some inferior lifters that were installed when the...

Need an AC condenser and/or the brackets i have an 04 SRT-10 and I need the condenser brackets Dodge says they are part of the condenser It has been on backorder for 4 months. Id take the whole condenser if I had too but I just need the brackets.

I am in need of the 4 support rods and bolts that hold the air dam away from the frame. I know its a minimal request but its all I need to finish my project truck Skip 281 804 6892