Recent content by JTS VENOM PERFORMANCE

you should do a draw test, and an alternator load test to be sure, just guesing is just that a guessing game, but if you are running a couple amps, its more than likely having a hard time keeping up get ahold of js alternators in sc, he has an upgraded unit that will work perfect for your...

if you want a little extra 4.56 , but understand , unless your unit is brand new, swapping gears should consist of changing all the bearings out, normally depending on the area it runs from $500-$1000 for a gear change unless you can do it yourself, gears are quirky, and be sure to do your...

yeah we had to go back rebuild the complete engine, new cam, replace a ton of things,and completely redo the wiring, but she is running nice and shifting actually now, he is more than happy with our results!:rock:

depends on how they did the test, but sounds like you are in the range of all being the same, ive seen low an high readings, our gauges show 160-180 but have seen other gauges show low

Those are basic mods, do you "have" to get a tune? no sir, but the quads take very well to a tune, stock they have a trq limiting tune in the pcm, limiting timing fuel so forth on lower rpms, so with a tuner you will gain immensely in the lower rpms, upper not so much. oem they come rich, with...

Some will remember Mickey from the old crowd, but he has since passed away and his truck was purchased. brought to JTSVP and refreshed a bit Its an rc with a gm 4l80e with a gear vendors unit Paxton and normal mods headers so forth We pulled and rebuilt the engine, straightened out a...

eh , done it a couple times, mostly the rear ones, its not hard to miss that itty bitty dang lifter, keep Rockin too slow your never slow!:rock:

MAN I'm ROUND AS SANTA CLAUSE BABY! HOPE EVERYONE HAD A SAFE AND HAPPY HOLIDAY VACATION CAME BACK IN TO COUPLE HUNDRED EMAILS AND MESSAGES WORKIN HARD AS WE CAN TO GET TO EVERYONE ROCKIN!!!!!!!!!!!!!!:rock::D:D:D

We do sell wires specifically for the vipers and trucks, but do not repeat do not run msd, they will break down on you

one go back and double check that the push rods are in the lifters then recheck your lash, you can verify that the injectors are firing also first steps

MERRY CHRISTMAS AND HAPPY HOLIDAYS TO EVERYONE FROM JTSVP AND THE FAMILY! ROCKIN!

thanks guys, for those that don't know , yes I have become a firearm nutt lolol but let me work on the pistol mount first over the holidays, then will see what we can do on the at deal :rock:

I think it will, but not sure, I will call lou and find out boss

unless you find used, your probably going to have a long wait, plus they didn't make decent hp like the belangers do

you will be fine, just make sure to take breaks ever so often let her cool a bit, but make sure the weight distribution is correct on the trailor:beer: