Recent content by SucknGasKicknAss

Yep ... when I get back from vacation I'm going to tear the right rear down and fix the caliper and make sure nothing else is wrong. I'm thinking in the future, I'll upgrade to slotted discs. Overall, the brakes seem to work quite well (no squeak with the PosiQuiets) ... Thanks again!:rock:

I went out and bedded the brakes per Zeckhausen. Truck stops fine with no pull, pulsation, but still have the scraping noise when turning left (rhythmic), which if I apply the brake it either gets louder or stops. Definetely sounds like the rotor was turned incorrectly. Two questions: 1)...

Thanks guys!!! Taking truck in tomorrow.

Good point - Is the reason why I don't feel pulsation because it is on the back and you wouldn't feel the pulsation like it were on the front?? Any easy way to check the rotor? Thanks.

Thanks! Sounds like you are thinking it could be a hard spot on the pad? What grit of sandpaper should I use? What do you think about the slightly dragging caliper piston due to being punctured? Is that possible?

Just drove the truck and applied the e-brake when the noise appeared, the e-brake has no effect, noise still there.:dontknow: What is confusing is when I ask the question what has changed since I did this job: turned rotor, new pads, and a damn leaking piston (probably punctured it). I...

I think so...When I pulled rotor off, I sprayed down the emergency brake assembly and the cleaned out the inside drum of the rotor. I just drove the truck and noticed that when driving and the scraping happens I applied the e-brake and the noise doesn't change? What's puzzling is I'm...

At first, the sound would come as I started to take off (no brakes). Now after 100 miles or so, it appears as I turn left (sweeping or hard turn) with brakes off. Sometimes as I'm driving if I turn the wheel left (swerve) I can hear the noise, as soon as I correct back to center noise is...

Hello .... Any help would be appreciated :D Just did a brake job (all 4 tires) including turning rotors & putting on Centric Posi-Quiets. After everything was put back together, I had a rhythmic scraping noise coming from the right rear. First it did it constantly (going straight ...