Blackviper Engine Build

Contacted Jorge...he has a couple of personal issues he is tending to. He should be back with us in the near future.

Best regards Jorge, take care of important things first...

Roy
 
Thanks for everyone's concerns. I'm dealing with a family issue which I should have wrapped up by the first week of December. Till then, I'll check in from time to time.

Wish you guys all the best!
 
Just read this whole thread. Very nice! Impressive attention to detail :) Look forward to any updates as they come along :)
 
It's been a while since I've posted on the forum and unfortunately, it's only to put the truck up for sale. This past year has been crazy to say the least. I can be reached at 786-236-0189. I'm asking $40,000.00 obo. Below is the list of modifications. It only needs to be retuned to be completed. The truck has 13,000 miles. The build has approximately 1500 miles. The truck is in immaculate condition. It has been stored indoors all it's life and has only been driven in the rain, maybe once. It has also been seen by many on the forum.

2006 Dodge Ram SRT-10
13000 plus miles
Immaculate condition
$120,000 invested

Fully built motor (Invoice available)
Ported cylinder heads with the largest valves available (Flow data available)
Customer grind cam (Specs available)
Accusump system
Roe Super Charger set at 17lbs
Methanol injection
Custom intercooler
Customer heat exchanger
Custom plenum
Huge Accufab throttle body that flows 2100cfm
Custom 6 inch cold air intake
VEC tuner
SCT tuner
Has the ability to log via the VEC, the Dash Daq, Innovate’s software and the Nitrous Express software
Killer Chiller system
Custom fuel system will support 1000hp
Custom fuel cell
6 Innovate widebands on Bassani headers gives the ability to tune by cylinder
2 widebands on exhaust
Custom side exhaust
Race cats
Custom Nitrous Express system (Can support 300hp)
Full Billet transmission (HTS)
Customer powder coated brake calipers with the Viper logos on them
Vented and cross drilled brake discs
Custom suspension with adjustable shocks (QA1s)
Custom 60 inch traction bars
Rear air bags for suspension
Custom Raceline wheels 24x10 fronts with 305/35/24s and 24x12 rears with 305/30/24
Custom JTSVP hood with custom led lighting
Custom Viper logos all the way around. The one on the grill has the Viper eyes lighted by red LEDs
Custom fenders vents off a BMW M3 with the SRT-10 logo
Custom headlights and tail lights
Custom billet door sill plates engraved with the Viper logo
Custom billet items throughout the interior
Custom lighted acrylic gauge plates on the center console
Custom floor mats (Loyds)
Custom door panels
Customer center console and shifter
Assortment of custom gauges
Custom stereo out of a Jeep SRT-8 with surround sound, and front and rear cameras. It has the ability to play videos
Drag radials
Spare projector headlights
All sorts of spare parts
 
Last edited:
Good luck on the sale Jorge, hope all is well.

blackviper said:
It's been a while since I've posted on the forum and unfortunately, it's only to put the truck up for sale. This past year has been crazy to say the least. I can be reached at 786-236-0189. I'm asking $40,000.00 obo. Below is the list of modifications. It only needs to be retuned to be completed. The truck has 13,000 miles. The build has approximately 1500 miles. The truck is in immaculate condition. It has been stored indoors all it's life and has only been driven in the rain, maybe once. It has also been seen by many on the forum.

2006 Dodge Ram SRT-10
13000 plus miles
Immaculate condition
$120,000 invested

Fully built motor (Invoice available)
Ported cylinder heads with the largest valves available (Flow data available)
Customer grind cam (Specs available)
Accusump system
Roe Super Charger set at 17lbs
Methanol injection
Custom intercooler
Customer heat exchanger
Custom plenum
Huge Accufab throttle body that flows 2100cfm
Custom 6 inch cold air intake
VEC tuner
SCT tuner
Has the ability to log via the VEC, the Dash Daq, Innovate’s software and the Nitrous Express software
Killer Chiller system
Custom fuel system will support 1000hp
Custom fuel cell
6 Innovate widebands on Bassani headers gives the ability to tune by cylinder
2 widebands on exhaust
Custom side exhaust
Race cats
Custom Nitrous Express system (Can support 300hp)
Full Billet transmission (HTS)
Customer powder coated brake calipers with the Viper logos on them
Vented and cross drilled brake discs
Custom suspension with adjustable shocks (QA1s)
Custom 60 inch traction bars
Rear air bags for suspension
Custom Raceline wheels 24x10 fronts with 305/35/24s and 24x12 rears with 305/30/24
Custom JTSVP hood with custom led lighting
Custom Viper logos all the way around. The one on the grill has the Viper eyes lighted by red LEDs
Custom fenders vents off a BMW M3 with the SRT-10 logo
Custom headlights and tail lights
Custom billet door sill plates engraved with the Viper logo
Custom billet items throughout the interior
Custom lighted acrylic gauge plates on the center console
Custom floor mats (Loyds)
Custom door panels
Customer center console and shifter
Assortment of custom gauges
Custom stereo out of a Jeep SRT-8 with surround sound, and front and rear cameras. It has the ability to play videos
Drag radials
Spare projector headlights
All sorts of spare parts
Click to expand...
 
Mopar said:
I just spent 2 hours reading this to get to the dyno numbers and what a waste of time! Fml
Click to expand...

You must read fast , it took me 3 !!

Not a waste of time but rather an incomplete thread on a really sweet truck !!

Sooooo what's the dealio with this beast ?????? :dontknow:
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

Engine in the Duster :)
Screenshot 2015 04 20 08 35 29 1
Before.
Ram SRT 10 Kenwood Double Din
Back
Top