''Previously Tiny Giants Truck''

mike111777 · Feb 1, 2013

Hi, Everyone I just figured I would let everyone know that the truck is still alive as we have starting making a lot more mods to try and boost are levels up.. I have currently installed 69# injectors we made a custom cold air intake to get rid of the old roe heater. We installed a custom nitrous system, 2.5'' pulley, got rid of the vec and we are running SCT with custom tunes. We still are waiting for a 3rd 255 pump to come in as we still need more fuel.. The dyno sheet attached is the old numbers before the new mods and juice, we are just over 800RWHP & just over 900RWTQ but we are getting wheel spin on the dyno right now.

mike111777 · Feb 1, 2013

Here is on the dyno where you can see that the tires on spinning on the dyno with juice and also you can see we need more fuel!!

trussman · Feb 1, 2013

Thats a nasty beast. I wish I had the power to need tires that wide.

mike111777 · Feb 1, 2013

Thanks bro.

mopar-or-no-car · Feb 1, 2013

:drool::drool:Badass....we will be waiting for the new numbers!!:drool::drool:

caveman · Feb 1, 2013

When do we get to see video? Are you going to run it down the strip?

ViperJeff · Feb 1, 2013

Congrats, happy to see she found a Good Home

runningonvenom · Feb 1, 2013

Ya I wanna see some videos

tinygiants · Feb 1, 2013

I miss the beast. I am glad Mike is investing the time and resources into taking it to the next level.

SRT-10 Ralph · Feb 1, 2013

That's a Bad@ss truck!!!

Blue Bird · Feb 1, 2013

tinygiants said:
I miss the beast. I am glad Mike is investing the time and resources into taking it to the next level.

What all was involved in fitting the truck with tires that wide? That is really bad ass!

ICPREY · Feb 1, 2013

Nice truck man!! Nice to see someone pushing the Roe blower!!

mike111777 · Feb 1, 2013

Thanks everyone I will send some videos on the track as soon as it warms up as I live in MN and it is freezing cold out the truck is sitting in a heated garage until spring..

tinygiants · Feb 2, 2013

Blue Bird said:
What all was involved in fitting the truck with tires that wide? That is really bad ass!

Frame was narrowed. Axle was narrowed. Bed was tubbed. 4 linked. Wheels widened.

phxpoolguy · Feb 2, 2013

Awesome truck, I really like it. Track times though because dyno numbers are just, blah blah blah to me. A build like that should be run at the track, no disrespect.

NSDQ · Feb 2, 2013

He probably will track it, but got to get the fuel and everything else dialed in first on the dyno.

phxpoolguy · Feb 2, 2013

NSDQ said:
He probably will track it, but got to get the fuel and everything else dialed in first on the dyno.

Heard that before, too many dyno queens around here. I really like that truck and want to see it run., no disrespect to the new owner. I really get tired of HP numbers and dyno sheets but no 1/4 mile times. Like I said, just race it and enjoy you're truck.

tinygiants · Feb 2, 2013

phxpoolguy said:
Heard that before, too many dyno queens around here. I really like that truck and want to see it run., no disrespect to the new owner. I really get tired of HP numbers and dyno sheets but no 1/4 mile times. Like I said, just race it and enjoy you're truck.

The truck ran a 12.0 on the virgin run after the build. I never got the chance to dial in the suspension.

NSDQ · Feb 2, 2013

There you have it. Not just a dyno queen.

phxpoolguy · Feb 2, 2013

tinygiants said:
The truck ran a 12.0 on the virgin run after the build. I never got the chance to dial in the suspension.

Nice pass, never did hear your 1/4 mile numbers. I would build your exact same truck, BTW.

''Previously Tiny Giants Truck''

New Member

Attachments

New Member

Attachments

Active Member

New Member

Full Access Member

Well-Known Member

Misanthrope

Full Access Member

Active Member

Full Access Member

New Member

Full Access Member

New Member

Active Member

Full Access Member

Full Access Member

Full Access Member

Active Member

Full Access Member

Full Access Member

Support Us