Viper Truck Boneyard! Whatcha need?

VENOMOUS1 RACING

VENOMOUS1 RACING

Has Left the Room - Banned from VTCOA!
Joined
May 15, 2009
Messages
12,751
Reaction score
2
Location
Wacko Waco,TX
So I've decided to start a boneyard for SRT-10 Viper Trucks.
We'll disassemble and inventory parts that are obsolete as well as our normal go fast and get sexy goods for these beasts.
Have an 05 QC being disassembled as we speak.
If you're needing a part give me a shout!
Seats, engines, trans, carpets, suspension, rear ends, body cladding, push to start and radio bezels, steering columns, underhood items, and occasionally used go fast parts :rock:
image.jpg
 
Let me know if you come across a good set of caltrac traction bars, or possible your VR1 Bars for a 05 Quad. I'd prefer the VR1 bars, but cant get past the sticker shock. And no, I'm not taking a jab, I'm just a little poor right now.
 
Kopack_05 said:
Let me know if you come across a good set of caltrac traction bars, or possible your VR1 Bars for a 05 Quad. I'd prefer the VR1 bars, but cant get past the sticker shock. And no, I'm not taking a jab, I'm just a little poor right now.
Click to expand...

Understand. Actually picking one soon up that does have caltracs. I'll let you know on em.
 
Dr. Hack said:
So you now have a legit Salvage/Dismantler License?
Click to expand...

Lmao and here comes another secondary screename troll. Or is it the same one. Used to be it was researched and you trolls were banned. Guess I just gotta erase you myself. :chain:
 
I need the parts that hold the rear license plate lights in place, passenger side inner air vent, dividers in the center console, the center console lid, if it's clean. Possibly the factory stereo deck? My truck has what looks like a nice deck out of a different chrysler vehicle and alot of the functions don't seem to work, a decent factory deck would be a nice stopgap until I have extra project monies.
 
Yellow Devil said:
I need the parts that hold the rear license plate lights in place, passenger side inner air vent, dividers in the center console, the center console lid, if it's clean. Possibly the factory stereo deck? My truck has what looks like a nice deck out of a different chrysler vehicle and alot of the functions don't seem to work, a decent factory deck would be a nice stopgap until I have extra project monies.
Click to expand...

I can help ya in license plate light clips and vent but console going with seats and radio is gone already. Buzzards are strong on these trucks lol. Pick em clean fast!
 
SRTRAM10 said:
Is there somewhere we can get a stock oil temp sending unit? like direct from autometer?
Click to expand...

Yessir I can the new gauge and have a few used. Won't be long before they're no longer available too. Common item to go out after a decade. :D
 
Cal Trac traction bars

I have a brand new set of Cal Trac bars for a 2005 reg cab 6 speed.

Brand new never been installed.

Located in Red Deer Alberta
 
Will you sell the bottons on the back of the steering wheel there for the volume and change the radio channel?
 
I was going to get with X2 Builders to snatch up an instrument cluster. Been meaning to do that since like.. 2008? Mine needs replacing. When I first bought her in 2005 the stealership threw in an aftermarket alarm. The shop that installed it left a ground under the dash loose. That caused havoc:

-Truck shutting off then restarting while on the freeway
-Sometimes would not start but after a while it would
-Finally smoke coming from the dash area - burned resistors which rendered door locks inoperable and A/C control lights are gone.

While in Macon, Georgia (2008) it was traced to a loose ground. After tightening none of that ever happened again. SO... I need a instrument cluster for a 2004.

Also looking for:
-Front wheel well liners
-Driver's seat
-Lower bumper black mesh
-Grill mesh, black

That's about it.
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

pedro 011
IMG 0038
TIAWAN
425af4fa 978b 4bc1 b0fd 9c65db28d773
Back
Top