Cylinder 1 & 3 dead

seethrough · Jul 25, 2016

viperhauler said:
Ok it's been a month now!!
Update?

Not much progress lately Dan. Machinist got some lower pulley adapters made for me so now I need to get the supercharger pulley lined up and figure out where it will sit on the top plate. Once that is figured he can start machining the top plate. I am also having a different bottom end built since this one does not have billet caps and will need stronger rods to handle the extra boost.

ViperPoweredTruck · Nov 5, 2016

Did you get the truck together?

seethrough · Dec 14, 2016

Justin is done with the engine rebuild. Went with billet caps, Lunati rods, Wiseco coated pistons, ARP studs, and keyed crankshaft to help turn the bigger blower. Heads are set of Striker units with larger 2.125" intakes. Will get the motor back and have the machinist work out the top plate for the supercharger and I should be pretty close to being done. Here are some pics that Justin sent and some old ones showing the intake and blower.

BlackMamba50 · Dec 20, 2016

The last picture, I assume that is a custom inter-cooler of sorts. Are the fittings on the front of the valley pan for water to pass through the cooler?

BlackMamba50 · Dec 20, 2016

BlackMamba50 said:
The last picture, I assume that is a custom inter-cooler of sorts. Are the fittings on the front of the valley pan for water to pass through the cooler?

Never mind I went back and read the entire thread, total bad ass and looking forward to seeing what she puts down!

Cylinder 1 & 3 dead

seethrough

Member

ViperPoweredTruck

New Member

seethrough

Member

BlackMamba50

#10pistonkilla

BlackMamba50

#10pistonkilla

Latest posts

Support Us

Random Media