vallessrt10
Full Access Member
- Joined
- Jan 16, 2016
- Messages
- 84
- Reaction score
- 0
Does anyone know where I could get a nitrous plate for our trucks?
Nitrous plate
- Thread starter vallessrt10
- Start date
- Joined
- May 4, 2007
- Messages
- 255
- Reaction score
- 22
Taylor Helix Tower Power
You can use a Taylor Helix Tower Power spacer available from JEGS. It is 1" thick. You can machine it for nitrous nozzles and also use two nozzles, one for each plenum. It can also be machined to match the throttle bore either single oval or dual bores. Cost 100.00 and is nicely polished. Check my personal site under members list and you can see one with four nozzles. Matches well with the aftermarket throttle bodies.
You can use a Taylor Helix Tower Power spacer available from JEGS. It is 1" thick. You can machine it for nitrous nozzles and also use two nozzles, one for each plenum. It can also be machined to match the throttle bore either single oval or dual bores. Cost 100.00 and is nicely polished. Check my personal site under members list and you can see one with four nozzles. Matches well with the aftermarket throttle bodies.
- Joined
- May 4, 2007
- Messages
- 255
- Reaction score
- 22
Nitrous
By the way I might have two nitrous systems for sale. One with a four nozzle wet system on the throttle body. The second with 10 direct port nozzles on the intake manifold. The manifold has pop off valves. Both systems have never been used but were installed as a show truck. 15 lb. bottles with openers and heaters. I'll post them on this sight when they are available.
By the way I might have two nitrous systems for sale. One with a four nozzle wet system on the throttle body. The second with 10 direct port nozzles on the intake manifold. The manifold has pop off valves. Both systems have never been used but were installed as a show truck. 15 lb. bottles with openers and heaters. I'll post them on this sight when they are available.
vallessrt10
Full Access Member
- Joined
- Jan 16, 2016
- Messages
- 84
- Reaction score
- 0
How much are you going to be asking for them?
- Joined
- May 4, 2007
- Messages
- 255
- Reaction score
- 22
Nitrous Kits
Don't know any pricing yet. Will have to divide my setup into two kits and see what parts are in each kit. I'll list them on this web site when done. I have computers, relay assemblies, purge setups, fuel pumps, filters and tanks with heaters and bottle openers that are part of the setups. Also a separate fuel cell and CNC machined mounting brackets and solenoid mounting manifold that was made for the viper intake manifold.
Don't know any pricing yet. Will have to divide my setup into two kits and see what parts are in each kit. I'll list them on this web site when done. I have computers, relay assemblies, purge setups, fuel pumps, filters and tanks with heaters and bottle openers that are part of the setups. Also a separate fuel cell and CNC machined mounting brackets and solenoid mounting manifold that was made for the viper intake manifold.
VENOMOUS1 RACING
Has Left the Room - Banned from VTCOA!
Yes boss I'm a Nitrous Outlet dealer and can hook you up with what you need to safely and effectively spray your beast. :burnout:
You can email me at [email protected]
We DO NITROUS! :beer:
https://m.youtube.com/watch?v=N2_ILeU-HtI
You can email me at [email protected]
We DO NITROUS! :beer:
https://m.youtube.com/watch?v=N2_ILeU-HtI
Thunderbuddies
Member
whats your website?
VENOMOUS1 RACING
Has Left the Room - Banned from VTCOA!
You're here!:burnout:
Support Us
Become A Supporting Member Today!
