Paxton Supercharger

LitemUp · Sep 16, 2017

Ok, guys I haven't posted much in the last few years. I'm thinking about pulling the supercharger of the truck and selling it. This is a feeler thread to see if someone will be interested. So here is the breakdown.

1. Paxton Supercharger kit polished it has a custom bracket setup to run direct from the crank on it own 8 rib belt similar the Procharger. Doesn't piggy back off the accessory belt. That I know of there are only 3 setups like this. I have on it now a 2.8" pulley producing 10-12 lbs of boost. You can you smaller and get upto 15 psi with a 2.75" pulley if you desire.
2. I have upgraded the following: heat exchanger, bigger pump for the water to air intercooler, intake pipes (no cheapy drier hose), will come with bigger injectors 60lbs, custom crank pulley (you will need to key your crank), OEM fuel pump assembly with Roe Racing fuel pump 400 lph (will support upto 820 rwhp STILL BRAND NEW), Votech Race bypass valve, and Snow performance stage 3 kit.
3. You will need an SCT Tuner and a tune after its been installed.
Asking $5k let me know if anyone is interest email: [email protected] I'm sure you can go to my previous threads and see most of the pics of the system.

IronAffliction · Sep 16, 2017

Why are you selling?

LitemUp · Sep 18, 2017

IronAffliction said:
Why are you selling?

I want to go turbo.

IronAffliction · Sep 18, 2017

Nice choice. Wish i could buy it man. glws

viperhauler · Sep 18, 2017

want to sell the belt drive?

LitemUp · Sep 20, 2017

viperhauler said:
want to sell the belt drive?

Nah, just want to sell the entire kit completely.

NVR2OLD · Sep 21, 2017

Could you post some pic's of the supercharger?

LitemUp · Dec 2, 2017

Decided to keep it. No longer for sale

Kx1984 · Dec 3, 2017

was about to ask for pictures

let us know if you change your mind

Ive been on the fence

Kx

LitemUp · Dec 4, 2017

Kx1984 said:
was about to ask for pictures

let us know if you change your mind

Ive been on the fence

Kx

Now, that is all put back together and went with the smaller pulley Iâ€™m not going to be selling it anytime soon.

Kx1984 · Dec 4, 2017

Thats fine still on the fence

Kx

LitemUp · Dec 6, 2017

I had a few of you requesting pics of what the dedicated belt drive setup looks like, so here are a couple of pics.

tomdragoo · Dec 28, 2017

LitemUp said:
I had a few of you requesting pics of what the dedicated belt drive setup looks like, so here are a couple of pics.

Sent from my iPhone using Tapatalk

tomdragoo · Dec 28, 2017

I have the same set up on my 2006 srt 10 ! But I think there is parts missing, like for example the plate that hold the entercooler . Can you take more pics of the hole system?! Just trying to find out whatâ€™s missing plus make it better safe and less worry about breaking something! I have only owned the the sentence the first of this dec 2017 and already needing work done ! Thanks

Sent from my iPhone using Tapatalk

Pirana131313 · Dec 29, 2017

Who did the work for the dedicated drive?

LitemUp · Jan 8, 2018

Pirana131313 said:
Who did the work for the dedicated drive?

Doug Levin, but he is not making them anymore.

LitemUp · Jan 8, 2018

Ok, just to give you an update. Since changing the blower pulley to 2.75 I've had some issues snapping the idler pulley bolt that is located next to the stock tensioner pulley. So the issue is that with the smaller puller I'm getting belt flap on the back side of the blower pulley and the vibration of the belt is causing the bolt to snap on the idler pulley. So to correct the issue I'm placing an additional idler puller just below the tensioner puller on the blower to keep the belt from flapping. (see pic)

I order the pulley just my luck no one here locally has one. Ordered it on Friday last week so I should have it in by end of week. I've also having some spacers made for the new pulley to bolt up the blower and brackets, and will be getting them today. If all goes well should have the truck up and running by Saturday afternoon.

I'll take some more pics with the new pulley installed, and post them when done.

LitemUp · Jan 8, 2018

tomdragoo said:
I have the same set up on my 2006 srt 10 ! But I think there is parts missing, like for example the plate that hold the entercooler . Can you take more pics of the hole system?! Just trying to find out whatâ€™s missing plus make it better safe and less worry about breaking something! I have only owned the the sentence the first of this dec 2017 and already needing work done ! Thanks

Sent from my iPhone using Tapatalk

Ok, the bracket that I have on there is the once that come with the kit from Paxton "Charge Air Support Bracket" I couldn't find the part number for it. It's supposed to bolt the heat shield on the stock mainfold, but since I have headers I needed to modify it. I have attached pics sorry I don't have better ones.

tomdragoo · Feb 21, 2018

I built my own still having problems with the serpentine belt belt drive I need a bullet proof through everything out it system. How are you when your project come along. Seems like I have embarked on myself

Sent from my iPhone using Tapatalk

tomdragoo · Feb 21, 2018

NVR2OLD said:
Could you post some pic's of the supercharger?

I have plenty a picture of the supercharger. Itâ€™s all new to me! But Iâ€™m still trying to ride that bike

Sent from my iPhone using Tapatalk

Paxton Supercharger

Active Member

Full Access Member

Active Member

Full Access Member

Well-Known Member

Active Member

VTCoA Senior Member

Active Member

Full Access Member

Active Member

Full Access Member

Active Member

Attachments

Full Access Member

Full Access Member

Full Access Member

Active Member

Active Member

Attachments

Active Member

Attachments

Full Access Member

Full Access Member

Support Us