Just returned from the Doctor

shorty · Jun 8, 2018

Dr. Viper that is, Venomous 1 to the guys here. I will post pictures later but has a 6,000 sq ft shop, three bays, three trucks deep and a huge office section. I saw an older Chevy pickup he was building a muscle car engine for and then saw 6 SRT-10's in the shop. Engines, paint, body work---you name it Scott was very busy. Never too busy to help me out but none the less backlogged with work. I met him when he was working out of his house and well, pretty messy set up trying to utilize a garage and work in the drive way on 2-3 trucks at a time. This new shop is immaculate----so clean you could eat off the flour well organized and very professional. He has a super mechanic helper to boot.

Not only was I impressed with the set up but really thrilled for him. The quality of his work is 2nd to none and always willing to give good advice to any that ask. I was so impressed I now am thinking about a build job if I can part with my baby for a couple of weeks.

Pics to follow.

blazinsrt · Jun 8, 2018

Did you wipe your face after you left?

shorty · Jun 8, 2018

blazinsrt said:
Did you wipe your face after you left?

I consider your origin----PA and realize most of you guys up there in liberal land focus on excrement from the back side of humans as well as animals so will disregard your comment. :chain:

Pirana131313 · Jun 8, 2018

What did you have done?

shorty · Jun 9, 2018

spark plugs replaced
tail-gate auto lock fixed
granny steps reinstalled to stop the horrid squeaking
4 new rotors and pads---holes and slotted so I now look like the big boys that go fast and stop faster

mock cats installed for stupid inspection reasons
General tightening and inspection.

renewed a friendship that had been on hold for 2 years.

blazinsrt · Jun 9, 2018

shorty said:
renewed a friendship that had been on hold for 2 years.

Rekindled something huh :top: Make sure you get tested lol.

mopar-or-no-car · Jun 9, 2018

shorty said:
Dr. Viper that is, Venomous 1 to the guys here. I will post pictures later but has a 6,000 sq ft shop, three bays, three trucks deep and a huge office section. I saw an older Chevy pickup he was building a muscle car engine for and then saw 6 SRT-10's in the shop. Engines, paint, body work---you name it Scott was very busy. Never too busy to help me out but none the less backlogged with work. I met him when he was working out of his house and well, pretty messy set up trying to utilize a garage and work in the drive way on 2-3 trucks at a time. This new shop is immaculate----so clean you could eat off the flour well organized and very professional. He has a super mechanic helper to boot.

Not only was I impressed with the set up but really thrilled for him. The quality of his work is 2nd to none and always willing to give good advice to any that ask. I was so impressed I now am thinking about a build job if I can part with my baby for a couple of weeks.

Pics to follow.

Only the stupid fucks like yourself call him Dr Viper. Everyone else knows him as the resident HACK!

At least hes now fucking the unassuming in a decent shop and has 1 repeat customer...

Man that sucks for thoes that just dont know any better...

Psycho1122 · Jun 9, 2018

If V1 is doing enough work to support a stand alone shop, he must be doing something correct. If the quality of work is suspect over time with unhappy customers, it will not last too long.

I say good for him to take the plunge and do it for himself. :rock:

A website with services, parts and images could help alot.

Cheers!

shorty · Jun 9, 2018

mopar-or-no-car said:
Only the stupid fucks like yourself call him Dr Viper. Everyone else knows him as the resident HACK!

At least hes now fucking the unassuming in a decent shop and has 1 repeat customer...

Man that sucks for thoes that just dont know any better...

Tiny minds use childish language cause they can't express themselves as adults.

Do ya talk to the wife and kids they way you talk to us---same language I mean? I bet they are delighted.

shorty · Jun 9, 2018

mopar-or-no-car said:
Only the stupid fucks like yourself call him Dr Viper. Everyone else knows him as the resident HACK!

At least hes now fucking the unassuming in a decent shop and has 1 repeat customer...

Man that sucks for thoes that just dont know any better...

Wait, I missed where you were from. Explains so much. Oh me, mindless drivel from---oh never mind cause I am sure you will have to google the word drivel.

mopar-or-no-car · Jun 11, 2018

shorty said:
Tiny minds use childish language cause they can't express themselves as adults.

Do ya talk to the wife and kids they way you talk to us---same language I mean? I bet they are delighted.

Do i talk to my wife like some piece of shit, self centered texas fuck stick?

No.

mopar-or-no-car · Jun 11, 2018

shorty said:
Wait, I missed where you were from. Explains so much. Oh me, mindless drivel from---oh never mind cause I am sure you will have to google the word drivel.

Oh wise one. Based on your horrible mechanical ability and the trouble you seem to have with simple things related to anything automotive i dont blame you. You just dont know any better and thats fine most of the time. As long as its nothing major he can talk his way around guys just like you because YOU don't know any better. The guys that can think and do things themselves learned quickly how much of a joke this VR1 guy was and still is.

The majority of the guys buying these trucks today dont have a clue. So when Scotty boy talks like he knows they listen. About 75% deeply regret this. Now the beauty of it on facebook is guys cant voice their opinion when they get fucked by Scotty boy. Cant even call his bullshit out. He just deletes it and blocks the person.

Sorry for the gramer and spelling. Im on the road was talking to text..

shorty · Jun 11, 2018

mopar-or-no-car said:
Do i talk to my wife like some piece of shit, self centered texas fuck stick?

No.

Is this De Niro's brother? Only the really high IQ folks use childish language. Oh well, the low information voters have no real vocabulary.

shorty · Jun 11, 2018

mopar-or-no-car said:
Oh wise one. Based on your horrible mechanical ability and the trouble you seem to have with simple things related to anything automotive i dont blame you. You just dont know any better and thats fine most of the time. As long as its nothing major he can talk his way around guys just like you because YOU don't know any better. The guys that can think and do things themselves learned quickly how much of a joke this VR1 guy was and still is.

The majority of the guys buying these trucks today dont have a clue. So when Scotty boy talks like he knows they listen. About 75% deeply regret this. Now the beauty of it on facebook is guys cant voice their opinion when they get fucked by Scotty boy. Cant even call his bullshit out. He just deletes it and blocks the person.

Sorry for the gramer and spelling. Im on the road was talking to text..

That post could not have been written by anyone other than a genius. Oh me, you brilliance comes out in each post.

Pirana131313 · Jun 12, 2018

shorty said:
spark plugs replaced
tail-gate auto lock fixed
granny steps reinstalled to stop the horrid squeaking
4 new rotors and pads---holes and slotted so I now look like the big boys that go fast and stop faster
mock cats installed for stupid inspection reasons
General tightening and inspection.

renewed a friendship that had been on hold for 2 years.

How much did that cost?

shorty · Jun 12, 2018

spark plugs replaced
tail-gate auto lock fixed
granny steps reinstalled to stop the horrid squeaking
4 new rotors and pads---holes and slotted so I now look like the big boys that go fast and stop faster
mock cats installed for stupid inspection reasons
General tightening and inspection.
2 qts of oil
charged ac---right side not cold
Replaced one cutout motor and cleaned the other. they break when not cleaned.
$1620

I was happy with the cost and with the work done.

Pirana131313 · Jun 13, 2018

spark plugs replaced
tail-gate auto lock fixed
granny steps reinstalled to stop the horrid squeaking
4 new rotors and pads---holes and slotted so I now look like the big boys that go fast and stop faster
mock cats installed for stupid inspection reasons
General tightening and inspection.
2 qts of oil
charged ac---right side not cold
Replaced one cutout motor and cleaned the other. they break when not cleaned.
$1620

Champions, 2.10 a piece x10 $22.
Tail gate fix $0
Running board fix - tighten a bolt? $0
Rotors and pads of who knows what brand $400??? High ball
Sim O2s $80 a piece at most X2 $160
2 quarts oil $16
R-134 $25 at most
Electric motor $40

$663 at most in parts.

Owch

trussman · Jun 13, 2018

Pirana131313 said:
spark plugs replaced
tail-gate auto lock fixed
granny steps reinstalled to stop the horrid squeaking
4 new rotors and pads---holes and slotted so I now look like the big boys that go fast and stop faster
mock cats installed for stupid inspection reasons
General tightening and inspection.
2 qts of oil
charged ac---right side not cold
Replaced one cutout motor and cleaned the other. they break when not cleaned.
$1620

Champions, 2.10 a piece x10 $22.
Tail gate fix $0
Running board fix - tighten a bolt? $0
Rotors and pads of who knows what brand $400??? High ball
Sim O2s $80 a piece at most X2 $160
2 quarts oil $16
R-134 $25 at most
Electric motor $40

$663 at most in parts.

Owch

While the price seems high to me as well, if you figure a dealer charges viper tech fees on these at well over 100 an hr, this doesn't seem so high. I'm def not a fan clubber for vr1 but did you really price that whole list out just for an internet argument?

shorty · Jun 13, 2018

Pirana131313 said:
spark plugs replaced
tail-gate auto lock fixed
granny steps reinstalled to stop the horrid squeaking
4 new rotors and pads---holes and slotted so I now look like the big boys that go fast and stop faster
mock cats installed for stupid inspection reasons
General tightening and inspection.
2 qts of oil
charged ac---right side not cold
Replaced one cutout motor and cleaned the other. they break when not cleaned.
$1620

Champions, 2.10 a piece x10 $22.
Tail gate fix $0---
Running board fix - tighten a bolt? $0----
Rotors and pads of who knows what brand $400??? High ball---
Sim O2s $80 a piece at most X2 $160----
2 quarts oil $16
R-134 $25 at most
Electric motor $40

$663 at most in parts.

Owch

Champions, 2.10 a piece x10 $22.
Tail gate fix $0---
OVER AN HOUR AS THE ELECTRIC LOCK WAS BUSTED AND SCREWED UP THE BRACKET

Running board fix - tighten a bolt? $0----
DUH, NEW GROMMETS AS THE BRACKETS WERE NOT MADE FOR OUR TRUCKS.

Rotors and pads of who knows what brand $400??? High ball---
SLOTTED, GROOVES AND QUALITY PADS

Sim O2s $80 a piece at most X2 $160----
FINDING THE 3" DISCARDED CATS TOOK SOME DOING AND REMEMBER, CUT OUTS LIMITED SPACE FOR INSTALLATION.

2 quarts oil $16
R-134 $25 at most
Electric motor $40---NOT ON THESE CUTOUTS---I PRICED THEM.

$663 at most in parts.

The problem is you would find a fault had he had done the work gratis.

SRT10VENOMOUS · Jun 13, 2018

trussman said:
While the price seems high to me as well, if you figure a dealer charges viper tech fees on these at well over 100 an hr, this doesn't seem so high. I'm def not a fan clubber for vr1 but did you really price that whole list out just for an internet argument?

and a no where near accurate price out at that... I love it how people think that business do work at cost and dont have over head to pay so they do all the labour free with no mark up.. Yep thats how all businesses work .. everyone in business is just there to help you and not make a living or profit..

Wow just wow.. a generation of idiots

Just returned from the Doctor

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Full Access Member

Active Member

Full Access Member

1800HP Club. And climbing

Support Us