ltnate3
Full Access Member
2005 QC passenger front completely froze up...not sure where to get a rebuild kit or new caliper. So far the dealer has sent me the wrong part and so has Summt. Any help would be greatly appreciated.
Front Calipers
- Thread starter ltnate3
- Start date
Try Tony @ http://www.jtsvp.com/
Seems to have been a problem on these trucks for years .. mine does it when I drive about 20 to 40 miles now .. damn right side got so hot the rotor was glowing red ... it’s done it over the years multiple times .. when it cools off it’s fine on that side then the other side will do it .. same results cools off and it’s fine again .. it only happens when I’m going light to light in traffic.. it’s weird .. never seen anything like it ... flushed the brake fluid multiple times as recommended by many over the years on this site ..
I have a full rebuild kit that I will attempt when I get a chance ,, king procrastinator here .. I’ve had the kit for years lol .. got it from JTSVP.
I have a full rebuild kit that I will attempt when I get a chance ,, king procrastinator here .. I’ve had the kit for years lol .. got it from JTSVP.
CaptnCrash
Full Access Member
- Joined
- Jul 1, 2014
- Messages
- 217
- Reaction score
- 38
Try Roe Racing. I got a set of brand new 05 calipers there when I converted my 04.
beastmode1
Full Access Member
Try Scott at X2 builders they will help.
beastmode1
Full Access Member
They have one of the largest Viper Ram Junkyard in the country.
Glad you posted that ... couldn’t remember the name of that place if my life depended on it
I have a 2004 SRT10. When it needed Brakes about 3 years ago, I took it apart. The Rotors and Shoes had TRW part numbers. The Calipers are Brembo, but the rest is TRW. $64 each for the rotors and $32.00 per Box for the front and Rear Pads. Stan
04 trucks have single piston calipers ,,, 05 has 4 piston calipers . How do you know they are Brembos ? Brembo says they don’t make calipers for the ram srt10
Tony JTS rebuilds them, he done mine a few years ago...good people. He sent me the new rebuild, and I sent the core back when installed.
thewelshm
thewelshm
beastmode1
Full Access Member
Keep checking on ebay as well I have seen calipers for sale as well.
just buy the rebuild kit and be done with it. you can do it in a couple hours
Support Us
Become A Supporting Member Today!
