Could also be stuck / leaky injectors. That's pretty low mileage for an '04. Before you do a fuel pump, I'd pull the injectors and have them...
That's to adjust the pedals toward / away from the seat. My '04 has that and it's great for my short wifee.
I don't think so, but then again like other things everyone has an opinion. The steel flywheel thing is about DRIVEABILITY not 1/4 mile times....
I'm not sure about the 4 door trucks but on the RC's there is a boss on top of the cover that holds a bracket for a shock that runs forward to...
That new Supra is actually a BMW inside. Toyota cheated on this one ;-)
The only additive I know for sure works is Hotshot FR3 ... I've seen increased mpg in my cars and my diesel motor home. Less oil consumption in...
The math here is pretty simple. The cam on the back of the cam gear is about 50%. The cam gear is a 2:1 ratio to the crank. So there's 360'...
You don't state the year of the block but based on the crank trigger hole in the rear webbing I'd guess it's an 03-04. Good news if true...
PCM doesn't really have to. It's purely mechanical. The same coil fires 2 plugs. Those cylinders are opposite each other via cam timing and at...
See the image above your post, bottom right. If you have 1 coil that fires 2 plugs in a 4 cycle engine and those cylinders are not on the...
It's pretty easy to tell actually, 2 coil packs, 3 coils in one, 2 coils in the other with a total of 5 trigger wires. Not only is it cheaper to...
Very good Ronnie. Also there's a slight wrench in the Viper motor ignition plan most people don't realize. The Gen III uses what they call a...
If you're using after market cams that require higher valve spring pressures, regardless whether or not they use roller lifters, many builders...
If you're going to lower the front end you might want to look into a bump steer kit. Just another thing you have to correct when you lower things.
I put my XMetal single blade back on after I got tired of the BBK sticking and the additional return spring I had to add to stop that stuff. Now...
Based on personal experience I would say go for it IF the truck is strictly used for racing. If you street it I wouldn't do it, especially in a...
This is a TRUCK! Forget the aluminum flywheel, stay with steel, or you will be sorry. Everyone I know that put an aluminum flywheel in took it...
Looking at the FSM for a 2004 RC I'm going to assume here the '04 and '05 are similar. It appears that there's an interconnect to the trailer...
If all you have in terms of mods is just the TB and maybe a cold air, he is correct. When you start getting into headers, exhaust, cams, heads,...
I can vouch for Dan [ TheFastMan.com ] work. He does a stellar job and yes, he does the TB's for the Viper trucks. Saves a ton of cash as well.
Separate names with a comma.
