Search results

Ended up buying a rebuild kit for $60 or so. I should have bought the A1 Cardone rebuild ones when they were on Rockauto a few years ago when I had to replace the other side.

IMHO the stock unit is fine, I believe it may actually be the same one as the Gen 3 Viper. My oil temp stays right in line with the coolant temp and modern synthetic oil will not start breaking down at those temps. If you're using a used one I would be concerned with if it coming off a vehicle...

Looking for one before paying a dealer or Rockauto, figured someone may have one. Front since I can't edit the heading.

You're on the wrong site to sell a Viper (not truck) blower. At that price it would sell within a few hrs. How is it the blower only has 690 miles? If you were closer and I could pick it up I would grab it.

Not sure where you are looking for Prowlers, but there are eight on Ebay for below $30K and there are eleven below $35K. I've seen a few on Craigslist for mid twenties as well.

I have a small JMB catch can mounted on the front cross brace and the line pretty much goes down from there. The end sits next to the filter behind the A arm.

I run a catch can on the Ram and Viper. I removed the filters on the top and placed a 90 degree elbow on it and ran a line to the bottom of the car so I don't smell the fumes.

Not sure a loose harmonic balancer would cause your steering wheel to shake, good to look at but probably not the issue. How straight are your wheels? It's possible to have a bent rim that can cause vibration issues.

Difference as in?

I don't really think it was all that loose if it was still 200ft lbs vs 250ft lbs. Either way, if it fixed your issue then that's all that matters. Putting a stripe of paint or "torque stripe" through the washer/bolt/damper area will help visually see if the bolt loosens again.

Might want to look at the tensioner.

How old are the tires?

Lancaster. Millersville specifically.

I'm a fan of the 71 body style, but they are both great mopars!

I have an Amazon Foam Cannon that I may have used once (if that) that someone can have. The person would just have to pay shipping. The reason I didn't use it is because the Karcher takes a different adapter than regular pressure washers. I bought a plastic adapter for the Karcher and it leaked...

Congrats to all the winners, it nice having the Vipers,SRT 10 Rams, and SRT 8 Jeeps in one spot.

You need the pressure washer. Without it you have the Foam Blaster. I got a Karcher for $130 and it can be used around the house.

Earlier in the week it was still up, I tried yesterday to actually pay and it's closed. So I'll be in the same boat Saturday.

Pretty sure you can pay prior online, you just have to pick up your goody bag and window sticker.

I'm planning on going on Saturday with my Viper.