Search results

Was it common to have a damper on the driveshaft? Talking about an 05 RC. It’s located near the trans tailshaft. Quite large and looks heavy. Is there an equivalent replacement without the damper or can it be removed. Gotta get under there again to see but is it only on the slip yoke side of...

So does anyone have any info on the circlips for the lower ball joints? While degreasing the front spindle during a wheel bearing swap I must’ve dislodged a piece of the circlip that secures the lower ball joint in place (grease and grime prolly held it in place). I haven’t tried measuring it...

So after putting this out on other forms of media, I asked about what I found in my new Belangers headers, midpipes, high flow cats system with a full Magnaflow cat back. It’s advertised on multiple sites as a “complete 3” exhaust system that requires no cutting or welding, full bolt on”. Well...

So after putting this out on other forms of media, I asked about what I found in my new Belangers headers, midpipes, high flow cats system with a full Magnaflow cat back. It’s advertised on multiple sites as a “complete 3” exhaust system that requires no cutting or welding, full bolt on”. Well...

So I’ve been seeing a couple different part numbers and different lengths for these bolts. 8909-B and 8909. The B model length says 1” while the regular number says .0875” or 7/8ths. Which one is correct for our engines?

So I received my new QA1 shocks in the mail the other day and since I been searching around on here I really never saw a decent review. There may be some in depth talk about them or other brands but I haven’t seen anything but “I have these” or “I just got them and their great”. So I thought why...

First time seeing this product and decided to look it up. Noticed it on one of the hotrod shows on tv this morning. Wondering if anyone on here has a review of this product. https://www.tribotex.com/

Im just thinking out loud here but after looking at the design of our intakes and also the gen2, my question is why didn’t someone consider a central plenum design so that all the runners have access to the same amount of volume from the throttle body? What I mean is if you look at the intake...

Looking to cover both banks with one device logger. I really don’t need a gauge, just want to record runs and analyze the data. Can’t remember the brand I used on my old Vette but it was perfect for recoding runs and the handheld device was removable after I was done. Of course it had side pipes...

So does one exist? I’d ditch my tailgate and tonneau cover in favor of a nicely done cargo net with a SRT-10 logo. Tried looking in the usual places but came up empty handed. Don’t want a regular net though.

So, as with many of the subjects I try to research on here I come across threads that are many years old and have been abandoned without any update or resolution. Spending the last couple days searching what clutch would best suit me I have given up and started this thread. Since I’m pretty...

So I’m in the process of gathering parts to correct the pinion angle due to previous owner lowering the truck. I’ve come up with a -2 degree difference for the diff and bought a 4 degree steel shim kit. My problem is the length of the U-bolts currently on the truck (10.25” long). The shim is...

Going to preface this thread with the fact that most of the threads I’ve already researched have been about double din sizes and more extravagant setups. My situation should be more simple. So I’ve got an 05 RC with the stock din & 1/2 radio and infinite sound system that has the amp under...

05 RC with 26k miles So lately I’ve been noticing that at random times my engine will misfire and or backfire when driving. First time it happened it was right after I fully filled the tank. I was lightly accelerating on an entrance ramp to the interstate and it was bucking like crazy. I...

I finally got around to installing these kits which I got from JMB. My truck is an 05 RC that had been lowered already from what appears to be at least a 2/3 kit judging by the rear blocks under the axle. The front I haven’t the slightest on how they did it considering the sticker tag was...

My 05 RC appears to be lowered 3†in the rear with blocks and the front may be lowered as well. I just picked this thing up and still learning so excuse the lack of knowledge here. My ground height to center of each wheel well is all close to 33.5†with the fronts being about a 1/2†lower and...

I’m looking to replace the rear axle damper shock (5th shock) with either OEM or an equivalent performing unit. I’ve searched here several times, on google, eBay and all the local auto parts stores online with no luck. The OEM part # is 05290831AA. The one in my truck had been leaking so I...

So I’m looking to replace the tonneau cover lock on my truck since the the used car dealer either lost the key or the transport trucker lost it. The lock is also missing the inside retaining plastic to hold it clamped to the cover. I tried searching but it appears as though this part has long...

Hey people, Just wanted to introduce myself like as the upstanding member I should be, lol. My name is Joe as my screen name shows, it’s a nickname I got from my motocross days. Former pro racer from the early 2000’s and now in my older age need a new way to keep my adrenaline fix going. I...

Hey guys and gals, Just wanted to pop in here like a good member and introduce myself. Names Joe as described in my screen name but it comes from my motocross background and it stuck. Always being the guy that would jump about any obstacle on any track I went to. Also use this name in most of...