Search results

I did 100k on our engines with the Bosch multifire plugs no issues, since my recent valve and head rebuild issue, I have done 1000 miles as of today. I have been running the E3 multifire plugs in it. I have to say this in 18 years of owning this truck the smoothest running I have experienced...

After changing every sensor ran compression test. no compression on number3. the push rod had not gone into the bucket, so I bent a valve on my new head ...Rookie mistake. ell im getting good at taking these apart and I have a spare rebuilt head. stay tuned.. thewelshm

The truck is running really rich, I'm going to swap TPS and IAC. But I also noticed this one. What is it called and does anyone have a part number? thewelshm

So I'm down to reinstalling rods and rockers and I mistakenly dropped the push rod on number 10 inlet between the gasket and the block, I can see it with the remote camera and bought a bunch o magnetic tool. No luck yet, it's probably head back off deal, unless someone has a retrieval trick, any...

The valve seat came apart, I got the head fixed for $380.00 plus a valve and 20 seals. Piston has some dings but not bad, Im going to lightly sand with a dremmal and see how it looks, Anyone have the torque settings for re install? thewlshm

So I had an issue with Mid range door speakers (original OEM 2006) they would work sometimes, Just replaced all speakers with "Kicker speakers" same problem, tweeters and Sub working only? Any suggestions? thewelshm

And now not at all, do these trucks have a common issue with door speakers? thewelshm

Anyone got any after market headers for sale that will fit an 06 QC? thewelshm

So my AC connector got hung up in serpentine belt, what a mess. Fixed ac and truck was stalling after a few minutes, new tps, Crank Sensor, IAC valve same issue. But today after scanning I found a broken wire to MAP sensor:) so I ordered a replacement MAP sensor and Wiring from Rock Auto. We...

It has to be worth mentioning that oil filter was loose causing residual oil to leak under pan, a drip or two.. thewelshm

I'm needing one, so if anyone with a kind heart has one let me know :) thewelshm

seriously on a scale to 10 Ill buy the site off you for $50 bucks and have it booming in two weeks, Navigation ability 1 out of 10 & I'm computer literate ( there goes the old guard for a start) ease of use sucks. Check out Smith and Wesson forums .com...

not quite sure yet 2006 in wonderful shape, with A JTVP motor 3000 miles ago new tranny and suspension. Tuner, interior immaculate. 06 QC $25K, IM STILL ON THE FENCE . thewelshm

Actual constructive discussion for at least 2 days...:rock:and no ignorant comments... Jeff am I RIGHT, ?? thewelshm

:rock: yep 2600 on forged motor and 600 on the tranny. :rock:Ran to Orlando the other day from Tampa, it still amazes me on the "Nice Truck" comments I hear:D Just thought I would share... thewelshm

on Friday July 13th 2018 I took my oath and Became an American :rock: thewelshm

Tony is picking her up for a rebuild:rock:Allbeit maintain generally stock internal replacements.... There are not many of these trucks around anymore. She had done 180108 miles before number 9 cylinder went out... ( valve?) possibly who knows but no compression. So looking forward to getting...

Well running the truck to the jobsite 2 weeks ago and she felt like it was running on 8? I had just gassed up so immediate thought GAS? Then I thought I have done 100k on Tony's coils and wires??? Hmmmm?? I ordered a new set from Tony :rock::rock:and spent the weekend doing plugs, wires, coils...

Anyone know where I can get replacement control arm bushings for a06 QC? thewelshm

go CLIIICK , CLIIICK, CLICKKK etc etc etc for a minute in a rotary sound until it stops???? Are the fan bearings replaceable?:o thewelshm