Search results

2005 Dodge Ram SRT-10 Regular Cab 3 owner truck… I have owned it since Sept 2010 at 6900 miles Clear title 32,450 miles Reason for selling: I need a backseat / SUV Modifications: MOPAR Gen 4 heads/intake upgrade (600hp flywheel… dyno’d at 512 rwhp) Braided oil cooler and power steering...

It's an extremely simple job ... EXCEPT getting to the outermost bolt to remove the headlight assembly. With our bumper covers, it is not easy, even with decent extensions. if I had an extra set of hands, it would have helped, certainly. I made sure to cover the bumper with a microfiber...

Hey guys, As you can see from the attached pic, the bump stops on my helper springs (that's what I call them) are toast. The other side doesn't look quite as bad, but its still in need of replacement. Where can I get a replacement pair, and is there anything tricky about this R&R? Looks like...

So, I'm coming back home from doing manual labor on one of my rental properties. I was in my truck b/c, hey its my tax write-off for my business and I had my tool bucket in the bed. I'm definitely speeding b/c, as well all know it isn't hard to do in these. 40mph zone, I like to get up to...

16k miles on fully assembled, OEM heads and intake manifold. Dodge Ram SRT-10 Forum - Viper Truck Club of America - WA 2 FST's Album: Gen 3 heads + intake manifold for sale $600 for heads + shipping $300 for manifold + shipping contact via email at [email protected] I do NOT have discount...

What are these worth? 16k miles on these parts. The heads are fully assembled with OEM valves/valvesprings. Just seeing if you guys know what these might be worth before I put them on e-bay/Craig's list.

Dodge Ram SRT-10 Exhaust Applications from Billy Boat Performance Exhaust For sale, in very good condition, a set of B&B hi-flow cat mid-pipes. Will bolt up to OEM manifolds. Will require B&B cat-back setup to work as a true bolt-on. New...$875 from B&B. I bought this truck used...

Made the 3.5hr trip to A.R.T. , just south of Austin. David Weaver is a true gentleman and a standup guy. We went through all the parts of the kit, and I got a tour of the shop. Lots of great looking Vipers... GTS, ACRs, and a couple of race cars. They also have a Rossion there, which is...

Done by a local shop I trust... plus Weedahoe's custom Double-Din setup for our trucks. I went with a Kenwood Double-Din receiver, JL900/5 digitial amp, JL 12" subs in a custom box (covered in black vinyl), and Focal K2 components in the doors and flush-mounted tweeters in doors. Boston...

Install looks pretty straightforward... but, I do not have a 1 1/4" open end wrench to remove the old lines. I do have a 1" socket to install the new fittings into the oil cooler and block bosses. Can I carefully use a monkey/crescent wrench to remove the old lines, or do I need to go try...

Trying to exhaust all options to running a drag radial on the street as a full-time, daily tire. I run them on my other two hot-rods, and have no problems. As we all know, there is no 22" DR out there. Was wondering if a 20" wheel/tire combo would just look horrible on these trucks...

Input welcome! I know these thoughts have been posted at various times on this board in the past, but I wanted to throw this out there again, as I consider more than the typical bolt-ons (which I have). Seems to me with these things, you're either "all in", or you end up with a pretty...

Truck has 12k miles on it. Went on a 4-day vacation, come back, fire the truck up (I drive it frequently, so it is not like its been sitting a month) and it wants to idle lower than normal. Drove it a lot today, fully warmed up, and coasting to stop signs/lights, with the A/C on, it...

Ok, I've had my RC for ~9 months, put 4k miles on it. Love this truck. Enjoyed my QC too, but I prefer this one. Strongly considering Stryker heads/cam combo that should get me another 100+rwhp/rwtq over what I have now... it may get me a lot more, but we'll never know til its all done...

Tony, Does the T-stat you sell come with a new gasket? Since I sold my QC and bought this RC, I need to get another 170^ t-stat now that spring is here. Let me know, and I will order online. Thx.

Today, I was driving and shifting normally, and the shifter acted like it was just flopping around in my hand. Turns out the bottom of the two bolts that connected the shifter shaft to the handle had broken off (so the handle was just pivoting on the one bolt). It had not backed out, but...

I'm sure this has been beat to death, but does anyone think any of the tire companies that make Drag Radials will ever offer one in a stock SRT-10 size? I have sent a couple of notes to Nitto. I know Nitto DRs are not as good at the track as the M/Ts or BFGs, but they are actually a very...

sorry for double post...mods please delete

This didn't post the first time... not sure why. Anyway, just thought this info might be good for the database...especially for those in the future looking to purchase one of these great trucks. I know I paid attention to the dyno/track #s before buying one. Mods: K&N drop-in, panel...

Three items for sale that I will not use: K&N drop-in filter... ~10k miles on it, in great shape. My new truck already had one in it, so I do not need this... $20. 2" Belltech lowering shackles... new in box $40 Roe single-blade TB... new in box $125