Auto to T56 Wires

[06qcsrt10]

I’m trying to figure out what wires to keep from my auto harness to use onto the T56 harness on my 2006 QC but I cannot find anything online. Picture 1 shows the 3 connnectors I no longer need but do need to use a few of those wires just don’t know which. Pictures 2 and 3 show the T56 connector that has 5 wires I assume for the speed sensor and reverse lights. If anybody can help me figure it out please. Also if possible maybe the mating end of the connector to new T56 to do a clean swap ?
Thanks in advance!

 

[Wifey]

Would looking at a wiring diagram for each type in the online manuals help you figure it out?

 

[Wifey]

@06qcsrt10
Or there is this from 2013 - Scott at Venomous ... he's not a supporting vendor here anymore but can probably answer your questions. He may be on FB too

 

[06qcsrt10]

Would looking at a wiring diagram for each type in the online manuals help you figure it out?

That would help a lot!

 

[VIPR PWR]

Would looking at a wiring diagram for each type in the online manuals help you figure it out?

Tracing the wires and colors based on a diagram of each type of truck .. or if possible still test and compare with a multi meter or test light …

 

[VIPR PWR]

Or there is this from 2013 - he's not a supporting vendor here anymore but can probably answer your questions

View attachment 69628

That’s the ticket ..

 

[Wifey]

That would help a lot!

I've never downloaded one of the manuals but here they are

Factory service and parts manuals

2004 https://www.mediafire.com/file/5l0oicgkiunpe9z/2004_Dodge_Ram_Factory_Service_Manual.pdf/file https://www.mediafire.com/file/e4akdvtvov4c1zi/2004_Dodge_Ram_Parts_Manual.pdf/file 2005 https://www.mediafire.com/file/pg98e29el6ijmpm/2005_Dodge_Ram_Factory_Service_Manual.pdf/file...

www.vtcoa.com