dyno run

Discussion in 'Dyno Stuff' started by Aussie Viper Truck, Nov 9, 2021.

  1. Aussie Viper Truck

    Aussie Viper Truck Active Member

    Messages:
    83
    Likes Received:
    111
    Joined:
    Feb 10, 2019
    Location:
    Australia
    Put my truck on a dyno today. it made 535 rwhp and 480 lbft
     
    Kiwi SRT10 and Srt10650 like this.
  2. 68charger

    68charger Member Supporting Member

    Messages:
    321
    Likes Received:
    19
    Joined:
    Jan 1, 2010
    Location:
    alberta ca.
    those are good numbers, as I remember when I did mine the torque was the higher number
     
    Aussie Viper Truck likes this.
  3. Aussie Viper Truck

    Aussie Viper Truck Active Member

    Messages:
    83
    Likes Received:
    111
    Joined:
    Feb 10, 2019
    Location:
    Australia
    It is running a ROE supercharger at 5psi boost
     
    Kiwi SRT10 and Srt10650 like this.
  4. Srt10650

    Srt10650 Full Access Member

    Messages:
    294
    Likes Received:
    228
    Joined:
    Sep 30, 2016
    What other mods besides the roe supercharger?
     
  5. Aussie Viper Truck

    Aussie Viper Truck Active Member

    Messages:
    83
    Likes Received:
    111
    Joined:
    Feb 10, 2019
    Location:
    Australia
    Aftermarket throttle body and STD cast iron exhaust manifolds with aftermarket 2 1/2 inch dual exhaust system.
     
    Srt10650 and Kiwi SRT10 like this.
  6. shirleyjp86

    shirleyjp86 Member

    Messages:
    61
    Likes Received:
    89
    Joined:
    Jun 11, 2021
    Location:
    Lavonia GA
    The horsepower is pretty decent, especially for such low boost, but the torque seems low :confused:
     
    Aussie Viper Truck likes this.
  7. Aussie Viper Truck

    Aussie Viper Truck Active Member

    Messages:
    83
    Likes Received:
    111
    Joined:
    Feb 10, 2019
    Location:
    Australia
    IMG_0010.JPG
     
    Srt10650 and Kiwi SRT10 like this.
  8. Kiwi SRT10

    Kiwi SRT10 Well-Known Member Supporting Member

    Messages:
    844
    Likes Received:
    844
    Joined:
    Dec 16, 2019
    Location:
    New Zealand
    I am getting close to a dyno run also, maybe next couple of weeks
     
    AMS3 and Aussie Viper Truck like this.
  9. Aussie Viper Truck

    Aussie Viper Truck Active Member

    Messages:
    83
    Likes Received:
    111
    Joined:
    Feb 10, 2019
    Location:
    Australia
    Looking forward to see what your Ram does.
     
    AMS3 and Kiwi SRT10 like this.
  10. 68charger

    68charger Member Supporting Member

    Messages:
    321
    Likes Received:
    19
    Joined:
    Jan 1, 2010
    Location:
    alberta ca.
    Do have any before numbers? when I installed my Roe I gained 150whp and just over 100ftlbs, but it was different dyno's so who knows
     
    Aussie Viper Truck likes this.
  11. Kiwi SRT10

    Kiwi SRT10 Well-Known Member Supporting Member

    Messages:
    844
    Likes Received:
    844
    Joined:
    Dec 16, 2019
    Location:
    New Zealand
    Before I bought it, the previous owner had it dynoed. It was on a Dynapack chassis dyno (NZ designed and Built). 551hp @4950rpm and 852 Nm @3932. It now has a tune from Torrie and goes hard right to 6250rpm.
    It will be interesting. It will be on a Mainline Dynolog. Anyway it will be a fun day out.
    Just been reading.....Dynapack and Dynojet read same ish, high. The Mainline Dynolog is approx 15% less, so DON'T expect too much
     
    Aussie Viper Truck likes this.
  12. Aussie Viper Truck

    Aussie Viper Truck Active Member

    Messages:
    83
    Likes Received:
    111
    Joined:
    Feb 10, 2019
    Location:
    Australia
    The ROE was installed in January 2005 within the first month of the original owner buying it in Alabama.
     
    Kiwi SRT10, Srt10650 and AMS3 like this.