Im not sure on the title of the vid though after watching it …I love Dave I've watched his videos before I would trust him with my work for sure
Click-Bait... 'cause it's way too competitive for YouTubers to get people to watch THEIR specific content, otherwise.Im not sure on the title of the vid though after watching it …
See just gotta change out those weak thin top pistons
No kidding, when I rebuild a 360 magnum for my 91 D150 I put 2x4s under the front on each side to help with the weight. I just don’t trust all that weight on the bell housing bolts to not pull threads, or snap an ear off. Thousands of dollars wasted if that block comes crashing down.Not surprised they left the crank sprocket on because that thing needs a puller with jaws of Kryptonite and the power of a 747 to pull it off.
I was kinda/sorta surprised they used an engine stand, as some are of the belief (me included), a long aluminum engine like that needs to be on a bench; instead of placing all the weight/load on the rear flange during assembly.
Yes.No kidding, when I rebuild a 360 magnum for my 91 D150 I put 2x4s under the front on each side to help with the weight. I just don’t trust all that weight on the bell housing bolts to not pull threads, or snap an ear off. Thousands of dollars wasted if that block comes crashing down.
They CAN go up and down for a long time and change directions 210 times per second (at 6300 r.p.m.), and enjoy doing so. BUT... introduce a wee bit of detonation and they will complain rather quickly and want to leave their home.See just gotta change out those weak thin top pistons