Arska2
EU Moderator
Hi,
I herewith want to introduce you to Tom and his fabulous build of a
RAM SRT10 ACR-X version of our beloved trucks.
Tom is a member of the German chapter of the VTCOA and below you can find some details about what he has achieved during a 5 month almost full time built time of his truck.
He has been searching quit a bit for a low mileage and crash free SRT10. Now after his third SRT10 he finally found the right one to do the transformation project....:rock:
Ram SRT-10 RC; black ; 32T mls; bone stock (except a LPG Gasinjection)
Idea :
Ram SRT-10 in a grey/black ACR-Viper Look (AmericanClubRacing) with priority on performance and look.
Built time :
01/2014-05/2014 (almost every day with lots of support from another member and owner of the RATRAM Alex and his patient wife :rock:
Mods :
Bodywork :
- fully disassembled and deletion of all rust spots
- fully new painted in "Magnetic Grey Metallic"
- hood and Spoiler in black
- transformation to 2006er Front
- deletion of tailgate and installation of pronet
-Dodge Ram Daytona wing
- calvu mirror
Frame
- deletion of rust spots
- new painted in hammertone finish (grey/black)
- deletion of tow package
- deletion of extra wheel and base of extra wheel
- enlightened front and rear bumper steel support
Suspension:
- new spindle,…new Poly bushing and painted
- lowered with DJM springs front and belltech leaf springs in the back
-10X24“ alloys with 305/35/24
Brake:
- Brembo 6-piston caliper at the front
- drilled and slotted brake discs
- ss brakelines
- 5.1 brakefluid
engine/engine bay/gear box :
- compression set at 10,2:1
- Bassani shorties
- Roe Racing theottle body
- valve cover polished
- intake high gloss consolidated
- JMB Cold-Air-Intake
- cooling fluid hidden
-JMB washing fluid
- deletion of aircondition
- deletion of lpg Gasinjection
- new organic clutch
- cleaning of gear box
- short shifter
interior :
- deletion of seats and third seat; replacement with cobra racing seats
-6-point safety belt
- steering wheel upholstery with new design (flat bottom); matching shift knob shifterbag
-B-pillar, sunshades and roof in black suede
-A-pillar and plastic parts colored in black
- all former silver parts painted in high gloss black
other :
- ACR-Design folie
-„RAM ACR-X“ lettering on doors and hood
-Viperemblem at the front
- weight race ready 2030kg ( 4.466 lbs) (weight in 2013 before transformation : 2280kg (5016 lbs)
The truck to start with :
Dissassembly :
On its way to the paint shop :
At the paint shop :
Returm from paint shop :
Freshing up engine and gear box :
Frame, bumper support - first steps.... :
Brake upgrade with Porsche 6-piston caliper:
Interior and final assembly :
FINAL RESULT
I herewith want to introduce you to Tom and his fabulous build of a
RAM SRT10 ACR-X version of our beloved trucks.
Tom is a member of the German chapter of the VTCOA and below you can find some details about what he has achieved during a 5 month almost full time built time of his truck.
He has been searching quit a bit for a low mileage and crash free SRT10. Now after his third SRT10 he finally found the right one to do the transformation project....:rock:
Ram SRT-10 RC; black ; 32T mls; bone stock (except a LPG Gasinjection)
Idea :
Ram SRT-10 in a grey/black ACR-Viper Look (AmericanClubRacing) with priority on performance and look.
Built time :
01/2014-05/2014 (almost every day with lots of support from another member and owner of the RATRAM Alex and his patient wife :rock:
Mods :
Bodywork :
- fully disassembled and deletion of all rust spots
- fully new painted in "Magnetic Grey Metallic"
- hood and Spoiler in black
- transformation to 2006er Front
- deletion of tailgate and installation of pronet
-Dodge Ram Daytona wing
- calvu mirror
Frame
- deletion of rust spots
- new painted in hammertone finish (grey/black)
- deletion of tow package
- deletion of extra wheel and base of extra wheel
- enlightened front and rear bumper steel support
Suspension:
- new spindle,…new Poly bushing and painted
- lowered with DJM springs front and belltech leaf springs in the back
-10X24“ alloys with 305/35/24
Brake:
- Brembo 6-piston caliper at the front
- drilled and slotted brake discs
- ss brakelines
- 5.1 brakefluid
engine/engine bay/gear box :
- compression set at 10,2:1
- Bassani shorties
- Roe Racing theottle body
- valve cover polished
- intake high gloss consolidated
- JMB Cold-Air-Intake
- cooling fluid hidden
-JMB washing fluid
- deletion of aircondition
- deletion of lpg Gasinjection
- new organic clutch
- cleaning of gear box
- short shifter
interior :
- deletion of seats and third seat; replacement with cobra racing seats
-6-point safety belt
- steering wheel upholstery with new design (flat bottom); matching shift knob shifterbag
-B-pillar, sunshades and roof in black suede
-A-pillar and plastic parts colored in black
- all former silver parts painted in high gloss black
other :
- ACR-Design folie
-„RAM ACR-X“ lettering on doors and hood
-Viperemblem at the front
- weight race ready 2030kg ( 4.466 lbs) (weight in 2013 before transformation : 2280kg (5016 lbs)
The truck to start with :
Dissassembly :
On its way to the paint shop :
At the paint shop :
Returm from paint shop :
Freshing up engine and gear box :
Frame, bumper support - first steps.... :
Brake upgrade with Porsche 6-piston caliper:
Interior and final assembly :
FINAL RESULT
Last edited:
