Silver05
Full Access Member
- Joined
- Apr 16, 2017
- Messages
- 514
- Reaction score
- 12
Well... here’s the trucks current state
https://imgur.com/a/ubJC3NF
https://imgur.com/a/ubJC3NF
Decided to pick up the valve covers and Intake today so I can powdercoate them, good thing I removed the baffles, I did not know it had the sponge in the under side , can I replace it?
https://imgur.com/a/TDNEmbs
It is EXACTLY THE SAME "stuff" they use for filter-media on saltwater fish-tanks.
If it isn't available at a dealer, you can always count on your local pet-supply house to help you source materials for your Viper engine.
Clean the bolts/holes with solvent and use some thread-locker so they don't fall out after you bolt the plate back on.