ARP head studs install

[DESRT10]

Getting ready to swap heads. Any suggestions on ARP head stud install.

Brand new studs and new Cometic gasket.

What lube, what torque steps and final torque to tighten to?

 

[yellowfever#154]

Talk to ARP and follow there specs.

 

[BLWNSRT]

Talk to ARP and follow there specs.

:dito:

They will give a spec sheet and I bought an extra container of there lube cause sometimes the little tube they give you isn't enough.

 

[DESRT10]

:dito:

They will give a spec sheet and I bought an extra container of there lube cause sometimes the little tube they give you isn't enough.

Good idea, will see if local shop carries it.

I found the spec sheet, 3 steps to final torque of 120ft/lbs. Important step Tony told me was to seal the threads as some protrude into the water jacket. Good to know.