Cheers lads, I got in touch with Andy and he will no doubt verify the numbers.
Right.............here's the long story..............
I got the truck serviced when I first got the truck (08) and they let the young boy replace my brake pads.
He smashed one of the bakerlite pistons and I had a full brake seizure on the passenger side.
The dealer payed for the pistons and new EBC rotors but I think it damaged the caliper.
I replaced that side with a 2nd hand caliper from X2 builders but when bleeding the brakes, I pressed the pedal down as hard as I could to check for leaks.
I think one of the pots on the drivers side must have been sticky and the by the time I pulled up, the drivers side rotor was glowing orange and I had a minor fire to put out.
It freed itself but I have a fresh caliper (I love ebay) to replace the burnt one.
I just think with everything I've had done, a couple of hoses and some new fluid wouldn't go a miss!!!
Trouble is, I'm in the UK so part numbers come in very useful.
Thanks to everyone for helping out.:rock:
Andrew.