BlackKnight
Full Access Member
I am selling a used crankcase breather cap with a viper emblem on top. This breather system utilizes the stock oil fill cap location so you don’t have to add and additional hole in your valve cover. No modifications needed, quick and easy install. Perfect for stock and highly modified engines!
The aluminum bung screws into the stock oil fill cap location. The chrome breather with filter then pushes into the bung and is very secure. To add oil to your engine, simply remove the breather, leaving the bung in place. This breather system features a 5/8" tube fitting with filter installed onto it. You may remove the filter and use a hose run to a remote catch can if desired.
It will fit 1992-2006 vipers and SRT-10's.
I've even cleaned the filter and charged it so its ready to go!
$45 (includes shipping) within the contiguous united states. Prefer PayPal
The aluminum bung screws into the stock oil fill cap location. The chrome breather with filter then pushes into the bung and is very secure. To add oil to your engine, simply remove the breather, leaving the bung in place. This breather system features a 5/8" tube fitting with filter installed onto it. You may remove the filter and use a hose run to a remote catch can if desired.
It will fit 1992-2006 vipers and SRT-10's.
I've even cleaned the filter and charged it so its ready to go!
$45 (includes shipping) within the contiguous united states. Prefer PayPal