Just learned my Centerforce clutch and Fidanza flywheel are toasted. I am in the middle of rebuilding the motor with a goal somewhat North of 700 rwhp. Need your suggestions and recomendations.
DUAL PLATE RAM CLUTCH--FEEDBACK PLEASE
- Thread starter SERPENT
- Start date
I have a McLeod dual disc. I like it. Mine has about 12k on it . You might want to talk to Tony about his set up.
Spoke to Tony yesterday. He had heard of Ram but was having good results with Spec. My builder has apparently had good results with Ram for over fifteen years. Do you experience any chatter? Is your set up comfortable for the street?
There is no slipping. You in gear or out. Starts on hills are alittle tough. There is alittle noise sometimes but not bad.
SPEC Stage III from Tony...I have had it in for about 2K miles now...love it...I have about 700 at the rear wheels and it hooks...
The Centerforce I had before would not grip if I hit 5th instead of 3rd while at WOT...the engine would spin like the clutch was disengaged and smoke would pour...
The SPEC will hold. No engine spin and no smoke. No chatter.:rock:
The Centerforce I had before would not grip if I hit 5th instead of 3rd while at WOT...the engine would spin like the clutch was disengaged and smoke would pour...
The SPEC will hold. No engine spin and no smoke. No chatter.:rock:
Support Us
Become A Supporting Member Today!
