E3 plugs

[bclark05]

It has been a little bit, so anyone running the E3 plugs have any more input?
Considering the indexing of the plugs, these E3's should eliminate that. Just triing to get some more input before I consider the purchass with Tony's new coils.:rock:

 

[SHU-DOG]

Ive got them in.

They do seem a lil bit more responsive.

BUT

The truck is not on the road. Only driving it down the alley an such. Still partiallly dissassembled.....

I recomend them.

SHU

 

[Yellow venom]

I'm running them too,with Stinkers coils I think they should be even better!

 

[JTS VENOM PERFORMANCE]

Ive got them in.

They do seem a lil bit more responsive.

BUT

The truck is not on the road. Only driving it down the alley an such. Still partiallly dissassembled.....

I recomend them.

SHU

lets disect this here qeeeoooote

I got them in....................meaning e3's are installed hmmmm

they seem a bit more responsive...........................hmmmmm again

the truck is not on the road, but drove it down an alley, partially dissassembled

i recommend them.............

meaning...

I put a set in

brakes were not bled but figured I would be ok

ran it down the alley

stomped onthe gas, the e3's gave it 400hp, and then ran into a walll

man these things are sweet!:aetsch: :aetsch: :aetsch: :aetsch:

 

[Yellow venom]

lets disect this here qeeeoooote

I got them in....................meaning e3's are installed hmmmm

they seem a bit more responsive...........................hmmmmm again

the truck is not on the road, but drove it down an alley, partially dissassembled

i recommend them.............

meaning...

I put a set in

brakes were not bled but figured I would be ok

ran it down the alley

stomped onthe gas, the e3's gave it 400hp, and then ran into a walll

man these things are sweet!:aetsch: :aetsch: :aetsch: :aetsch:

ONLY 400? Did you make sure all the plug wires were on??? :aetsch: ,Damm wall anyway!

 

[SHU-DOG]

lets disect this here qeeeoooote

I got them in....................meaning e3's are installed hmmmm

they seem a bit more responsive...........................hmmmmm again

the truck is not on the road, but drove it down an alley, partially dissassembled

i recommend them.............

meaning...

I put a set in

brakes were not bled but figured I would be ok

ran it down the alley

stomped onthe gas, the e3's gave it 400hp, and then ran into a walll

man these things are sweet!:aetsch: :aetsch: :aetsch: :aetsch:

LOL

Actually it was the oil dripping off the oil lines that did me in. Haha

Nah the hood, grill front n rear bumper are off. Now the tonneau, wing and taligate are coming off. Still deciding on wether or not to take off all of them side molding/cladings or not.

I woulda thought running my own paint n body shop i would have all kinds of time to work on it.

WRONG