My B&G ECM IS HERE!

[phunny]

Bought it from Venomous1 and he sent it to B&G and I have received it. Any advice on the install? Anything is appreciated.

-charlie

 

[TNVIPER]

Easy install...just watch about breaking the red tabs.....let us know how it does..:rock:

 

[nycstev]

This is old school

 

[GADodgetech]

Take a coupla bolts loose, unplug the thingys and plug em back in. Oh and tighten the coupla bolts back up. :marchmellow:

 

[ZCx]

squeeze both sides of the ECM plug locks

 

[phunny]

Installed it at 6:00 AM in the dark with snow :rock: . I'll get on it later today, kinda wanted to take it easy and make sure she's running good.

-charlie

 

[kickinassrt-10]

She'll be running fine....Don't mash it in the snow you will get definite rear tire spin in 1st and 2nd gear!

 

[rmdysrt]

You can't get the plugs wrong (don't ask) they only go in their respective holes. Just be gentle plugging them in and enjoy!!

 

[SANCHOBA]

i would have disconnected neg. battery cable first!

 

[kickinassrt-10]

i would have disconnected neg. battery cable first!

I was told by the vendor it's not necessary to remove the battery cables...it was one of my concerns too!

 

[SANCHOBA]

I was told by the vendor it's not necessary to remove the battery cables...it was one of my concerns too!

bend a pin when your trying to plug it in....SHORT AND FRY

 

[kickinassrt-10]

bend a pin when your trying to plug it in....SHORT AND FRY

LOL....sounds like you been down that path then...

 

[VENOMOUS1 RACING]

Congrats man, let us know how she does now that she is awaken!:rock:

 

[phunny]

SHE'S ALIVE. Now I have traction problems. WOOHOO! :rock: :rock: :rock: