Srt10ram
Full Access Member
- Joined
- Dec 4, 2008
- Messages
- 126
- Reaction score
- 0
Well it's been awhile since I posted on here, but tonight I drove this heavy son of a bitch into the 12's. I've been sitting on a 13.3 for one and a half years (http://www.vtcoa.com/forums/f11/ram-srt-10-rc-first-time-1-4-mile-run-52302/), that was until tonight :rock:. Weather was low 50's and since I put on the BFG KDW's a few months back I decided I'd shoot for a new PR. The only mods on the truck are Magnaflow CB, Catless Mids, and rear lowering blocks.
I had the rear tires set at ~20psi and with a 3krpm launch slipping the clutch lead to a 2.06 60ft. Banged the rest of the shifts with the yard long shifter right at 6k which resulted in this.
Run was against a 13' 5.0 with bolt-ons and slicks, not very fast if you ask me. I've told myself that I'll never run any stick shift at the track unless I have some soft wall slicks, but I just wanted to get in the 12's. The next track visit will be on bias ply slicks, that's the only way to go with a stick car/truck at the strip. I got big plans for the truck, and even though it might take awhile trust me it ain't just 12's/high 11's.:y::y:
I had the rear tires set at ~20psi and with a 3krpm launch slipping the clutch lead to a 2.06 60ft. Banged the rest of the shifts with the yard long shifter right at 6k which resulted in this.
Run was against a 13' 5.0 with bolt-ons and slicks, not very fast if you ask me. I've told myself that I'll never run any stick shift at the track unless I have some soft wall slicks, but I just wanted to get in the 12's. The next track visit will be on bias ply slicks, that's the only way to go with a stick car/truck at the strip. I got big plans for the truck, and even though it might take awhile trust me it ain't just 12's/high 11's.:y::y: