New Traction Improvement Kit!!

[JMB Justin]

Wierd question, but can you use them along with the Caltracs?

Sorry I didnt see this until now, You could use the leaf spring clamps with the caltracs, but not the stuff to improve the factory slapper bar. If your interested I can get a quote together for just those and PM you,
Thanks
Justin

 

[RedRamRules]

I ask only because I wouldn't want to be redudndant and buy both and have no improvement. If its between one or the other I can understand. Thanks Justin!

 

[JMB Justin]

Ive got two more traction devices im testing (trying to find the best settings on my QA1 shocks and another trick up my sleeve), I should have some more traction solutions for everyone (especially RC owners) very soon.
Justin

 

[mauiSRT/10]

Ive got two more traction devices im testing (trying to find the best settings on my QA1 shocks and another trick up my sleeve), I should have some more traction solutions for everyone (especially RC owners) very soon.
Justin

Man do I need it now after installed the 4.88's!!


patrick

 

[weldedhemi]

Man do I need it now after installed the 4.88's!!


patrick

What 4.88s do you have?

 

[mauiSRT/10]

What 4.88s do you have?

Unitrax sells the gears.


patrick

 

[fast fred]

Any idea of this would help the QC? I'm not getting wheel hop, but it spins a lot off the line.

i put the R C set up on my 2005 Q C (leaf springs w/slapper) made a big diff.and it fits well bolted right up, and made a big diff. with the handling and traction.:rock:

 

[mosrt10]

Justin installed the kit for me saturday. I ran a couple 0-60 with my escort g force II and had low 5's. On the way home I did three more runs and I ran constistanly mid 4's 0-60 not bad at all I thought.

 

[mauiSRT/10]

I ordered mine today.....looking forward to getting it installed.


patrick

 

[moparracing]

Hey Guys,
I got JMBs traction improvement kit on my 04 RC and I am very impressed with it. It installs onto the OEM traction bars. The best way I can describe it is that it takes the slack or slop out of the OEM setup, more or less preloading the bars. Below are a link to the product and some pics.

When driving with the kit installed I experience NO negative handling effects. Under normal driving conditions I cannot even tell the kit is on there. When launching, I can hit it harder out of the hole with less tire spin. When I hit second gear now I get just a small chirp, where I could previously spin the tires for a little ways.

I definitey like the kit. As with all of JMBs products the powdercoating and attention to detail are outstanding. I can't wait for my local track to open so I can compare 60' times. I will post them as soon as I have them.

This is a great (and less expensive) alternative to the $400 traction bars. With the Caltracs your ground clearance is greatly reduced. With this kit clearance is not affected.

Great job Justin.:rock:

Product Link: http://jmbperformance.com/store/product_info.php?cPath=66_93&products_id=107

Pics:

thanks for the info, i'm going to have to get me a set..........