OEM aluminum tonneau and wing

[streetwedg]

I have a red srt tonneau cover with three point wing. Its flame red. It has some chips and scratches but not dented up. I have the key, but don't have any mounting hardware. its in toledo ohio $800

 

[mjd91]

My OEM cover doesn't have a lock...

 

[StinkyLinky]

Pm sent

 

[streetwedg]

the one on my truck doesn't either. but even the key on this thing says srt-10

 

[MNSRT]

Same cover that's on mine. These were very early production covers, I've only seen a handful of them. I'd be interested in seeing the key as mine is missing. It must be pretty stout as turning the key has to pop both latches.

 

[streetwedg]

 

[SRT10VENOMOUS]

800 is way too cheap, that's at least 1500 all day long.

 

[Leveil22]

Willing to ship?

 

[stealth78]

800 is way too cheap, that's at least 1500 all day long.

I agree! Should be about $3000. If anyone is interested in my black one... $3000 firm. LMAO

 

[VPRPWRD]

That is a screamin' deal! I'm surprised it's still available.

 

[streetwedg]

If you think its worth $1500 or $2500 buy it for resale. I want $800 My wife works for YRC so shipping could probably be worked out but not sure how to crate it.also may be posible to take it to cincinnati

 

[trussman]

It's a great deal. He did also say no mounting hardware. Not sure how much all that is or how hard it is to get, but either way this is the kind of deal I hope I find when I'm in the market to replace my cover.

 

[stanssrt10]

will take it if you can figure out shipping im in Denver Colorado.stan at 720/256/7731 don't carry this phone with me leave message,or a text will get back pretty quick thanks

 

[mjd91]

That's cool that the early ones came with locks. I wish they all did.

 

[SRT10VENOMOUS]

If you think its worth $1500 or $2500 buy it for resale. I want $800 My wife works for YRC so shipping could probably be worked out but not sure how to crate it.also may be posible to take it to cincinnati

After shipping it 2x it would not be worth my time,,

 

[scott.mcilvaine]

Please contact me if it is still available. I live in NJ, can you have it shipped there?
Scott
[email protected]

 

[Sigma-Wildcat]

RAM SRT-10 OEM Tonneau Cover With Wing

It's a great deal. He did also say no mounting hardware. Not sure how much all that is or how hard it is to get, but either way this is the kind of deal I hope I find when I'm in the market to replace my cover.

The hardware is a big deal. I have a extra tonneau cove. The hardware is very expensive if you can find it. The hardware alone could cost you up to $800.00. A lot of the hardware is no longer available. Check with your RAM dealer 1st before you purchase. It took me almost 2 years to get the hardware I have. I ended up going to salvage yards to get most of it.:rock:

 

[StinkyLinky]

The hardware is a big deal. I have a extra tonneau cove. The hardware is very expensive if you can find it. The hardware alone could cost you up to $800.00. A lot of the hardware is no longer available. Check with your RAM dealer 1st before you purchase. It took me almost 2 years to get the hardware I have. I ended up going to salvage yards to get most of it.:rock:

My dealer said I could by a new tonneau (fiberglass, no wing) and see if the hardware was the same. They don't show hardware only in the system for ANY covers (unless you only need to replace the gas struts).

Me: Uhhhhhh, how about a big negatory on that, ghost rider.

 

[MNSRT]

They must have been looking in the accessory category. If they were looking in the regular exterior sheet metal section it lists all of the brackets individually.

 

[stealth78]

That's cool that the early ones came with locks. I wish they all did.

Put a lock on your tailgate handle. If you cant open the tailgate, you cant open the tonneau!