DC Performance
Full Access Member
- Joined
- May 26, 2006
- Messages
- 136
- Reaction score
- 0
For those interested in a Performance Calibration for their truck, I hope you will consider us at DC Performance. We have spent quite a bit of time in testing and qualifying our Ram Truck calibrations.
Programmers 1996-2006 $699
A programmer allows you to download your performance
tune and change back to your stock tune when desired.
When you buy a programmer from us you do not get
a generic tune, you get our custom calibration. We
taylor our tunes to the particular modifications of your
engine, fuel used and your dyno sheets (if available).
JTEC Calibrations $450
You send us your controller and we program it to your
modifications.
Custom Tune $600
We tune your car on our load dynamometer and optimize
the timing and fuel curves for best power.
E Mail Tunes $150
For those of you that have SCT Programmers with less than optimal
tunes, we can send some better calibrations. All you need is a download cable.
We have been in the calibration business for some time, while many others are new to this. When you purchase a calibration from us,
rest assured we have the knowledge to get the job done right.
DC Performance offers complete dynamometer testing and tuning for all two and 4 wheel drive vehicles. Our in ground 224X Dynojet chassis dynamometer and DYNAPACK load dynamometer allow us to test and tune most any car on the market with complete load control and accuracy. We are familiar with many engine management and tuning systems including: AEM, SCT tuning, ACCELL DFI, UNICHIP, SPLIT SECOND, MOTEC, DIABLOSPORT, HOLLEY EFI and more. We also specialize in computer programming for a variety of vehicles. Each test includes a power printout. We also have extensive data logging and diagnostic tools to help achieve proper tuning.
DC Performance has experience working with just about every combination of parts and tuning systems that may be on your vehicle, and has the reputation for helping people make their cars run right, when other shops have given up.
Programmers 1996-2006 $699
A programmer allows you to download your performance
tune and change back to your stock tune when desired.
When you buy a programmer from us you do not get
a generic tune, you get our custom calibration. We
taylor our tunes to the particular modifications of your
engine, fuel used and your dyno sheets (if available).
JTEC Calibrations $450
You send us your controller and we program it to your
modifications.
Custom Tune $600
We tune your car on our load dynamometer and optimize
the timing and fuel curves for best power.
E Mail Tunes $150
For those of you that have SCT Programmers with less than optimal
tunes, we can send some better calibrations. All you need is a download cable.
We have been in the calibration business for some time, while many others are new to this. When you purchase a calibration from us,
rest assured we have the knowledge to get the job done right.
DC Performance offers complete dynamometer testing and tuning for all two and 4 wheel drive vehicles. Our in ground 224X Dynojet chassis dynamometer and DYNAPACK load dynamometer allow us to test and tune most any car on the market with complete load control and accuracy. We are familiar with many engine management and tuning systems including: AEM, SCT tuning, ACCELL DFI, UNICHIP, SPLIT SECOND, MOTEC, DIABLOSPORT, HOLLEY EFI and more. We also specialize in computer programming for a variety of vehicles. Each test includes a power printout. We also have extensive data logging and diagnostic tools to help achieve proper tuning.
DC Performance has experience working with just about every combination of parts and tuning systems that may be on your vehicle, and has the reputation for helping people make their cars run right, when other shops have given up.
