REAR
(1) Raise and support the vehicle.
(2) Remove the rear wheel and tire assemblies.
(3) Compress the caliper.
(4) Remove caliper slide bolts
NOTE: Do not allow brake hose to support caliper
assembly.
(5) Remove the caliper,
(6) Remove inboard brake shoe from the caliper
adapter
(7) Remove outboard brake shoe from caliper
adapter
(8) Remove the anti-rattle springs from the caliper
adapter
NOTE: Anti-rattle springs are not interchangeable.
REAR
(1) Clean caliper mounting adapter and anti-rattle
springs.
(2) Lubricate anti-rattle springs with Mopar brake
grease.
(3) Install new anti-rattle springs.
NOTE: Anti-rattle springs are not interchangeable.
(4) Install inboard brake shoe in adapter.
(5) Install outboard brake shoe in adapter.
(6) Tilt the bottom of the caliper over rotor and
under adapter. Then push the top of the caliper down
onto the adapter.
(7) Install caliper,
(8) Install wheel and tire assemblies and lower
vehicle,
(9) Apply brakes several times to seat caliper pistons
and brake shoes and obtain firm pedal.
(10) Top off master cylinder fluid level.
(1) Raise and support the vehicle.
(2) Remove the rear wheel and tire assemblies.
(3) Compress the caliper.
(4) Remove caliper slide bolts
NOTE: Do not allow brake hose to support caliper
assembly.
(5) Remove the caliper,
(6) Remove inboard brake shoe from the caliper
adapter
(7) Remove outboard brake shoe from caliper
adapter
(8) Remove the anti-rattle springs from the caliper
adapter
NOTE: Anti-rattle springs are not interchangeable.
REAR
(1) Clean caliper mounting adapter and anti-rattle
springs.
(2) Lubricate anti-rattle springs with Mopar brake
grease.
(3) Install new anti-rattle springs.
NOTE: Anti-rattle springs are not interchangeable.
(4) Install inboard brake shoe in adapter.
(5) Install outboard brake shoe in adapter.
(6) Tilt the bottom of the caliper over rotor and
under adapter. Then push the top of the caliper down
onto the adapter.
(7) Install caliper,
(8) Install wheel and tire assemblies and lower
vehicle,
(9) Apply brakes several times to seat caliper pistons
and brake shoes and obtain firm pedal.
(10) Top off master cylinder fluid level.