Steering rack bushings

[Vman455]

How hard are they to change? In the service manual it says I would have to remove the steering gear from the truck, but on Tony's website he wrote, "increase steering response immediatly noticed after install, only takes a few moments of time to increase the handling of the RAM SRT10," and elsewhere, "Installs in minutes and dramatically improves steering feel." That sounds like the rack doesn't have to come out to replace the bushings, if it only takes a few minutes.:dontknow:

 

[ZCx]

naw.

just take the rack mountin bolts off & the rack moves forward no prob.

pop the old rubbers out. clean the bore a bit. grease them up & install.

was able to give Tony a hand on the bushins & p/s lines.
every item was a big help. great frim ride & the steerin is way easier & responive.

even with just the rack bushins had to becarful when ya changed lanes the first couple of times

:rock: :rock: :rock: :rock: :burnout: :burnout: :burnout: :burnout:

 

[JTS VENOM PERFORMANCE]

pretty easy there teach, ZX was the first to try it all, and yessir pretty easy, and I dont have but one set left if not mistaken buddy

 

[Vman455]

Put my name on it. I want to do the full poly bushing upgrade.