Transmission and front brake prob

[05-SRT10-Silver Beast]

Whats up crew!

I have a Quad cab, 2005, SRT-10, Automatic and need help on the following:

Transmission-just rebuilt the original(upgrade servo, band, output shaft and 2600 convertor) and a month later it blew, then the shop said the flywheel was cracked and that's what caused the break down. WTF! so the shop rebuilt again, but still does not seem right!

Brakes:

since the trans rebuilt now my front brakes are sticking. When I take off, it feels like I have the parking brake on and takes more gas to go. When I got home I jacked up the front and it took full force to turn both front wheels.

Now im stuck and having trouble finding a damm shop in Houston to trust and knows what the hell to look for/fix the problems.

Someone have any ideas or can help!

Thanks,
Sam S.

 

[NightRunnerRC]

Drive to waco, I'm sure he'll chime in soon

 

[Chuck B]

I know nothing about automatic's....lol brakes though sounds like typical pistons binding in the bore. You can try cleaning up the pistons or at this point just install a caliper rebuild kit. I push my pistons partially out on my annual servicing. Wet sand with 600 grit and slide them back in....no issues in 150k miles.

 

[05-SRT10-Silver Beast]

Thanks I will try that to the calipers. Who in Waco would I call?

 

[ViperJeff]

Venomous1

 

[shorty]

I had my tranny rebuilt by the Mike at the following and 50,000 miles later it is as good as new---never even had the bands adjusted. VENEMOUS1 is Waco last week said no need as it was shifting perfectly.

About Us | Century Transmission | Century Transmission