Bad Azp Performance
Full Access Member
Looking for any information someone may remember on build specs other than general inf i have. Not looking to rehash any bad blood between the 2 but not wanting to waste $600 in complete gasket set by tearing it apart if i dont have too.
Supposedly has -
Billet crank/mains (crank verified)
ARP head/rod bolts (verified)
Oliver rods
Weisco pistons 8.5.1
Harland sharp rockers (verified)
Ported polished heads/intake
ATI damper (verified)
Turbo cam
McLeod clutch (verified)
Leak down test came back great.
Nobody kept any documentation for piston compression/ head flow/intake flow/ cam specs
Valve covers and intake were cf hydrodipped and red anodized jtsvp tb if that helps anyone remember
Supposedly has -
Billet crank/mains (crank verified)
ARP head/rod bolts (verified)
Oliver rods
Weisco pistons 8.5.1
Harland sharp rockers (verified)
Ported polished heads/intake
ATI damper (verified)
Turbo cam
McLeod clutch (verified)
Leak down test came back great.
Nobody kept any documentation for piston compression/ head flow/intake flow/ cam specs
Valve covers and intake were cf hydrodipped and red anodized jtsvp tb if that helps anyone remember
Attachments
-
received_509700651329560.jpeg304.3 KB · Views: 18
-
20230513_154751.jpg359.4 KB · Views: 16
-
20230528_174804.jpg373.6 KB · Views: 15
-
20230528_174841.jpg392.9 KB · Views: 15
-
20230624_054501.jpg395.9 KB · Views: 16
-
20230624_054520.jpg491 KB · Views: 15
-
20230624_055114.jpg492.6 KB · Views: 17
-
20230624_054534.jpg459.9 KB · Views: 15
-
20230624_055136.jpg407.6 KB · Views: 16
-
20230630_121515.jpg541.6 KB · Views: 18